It's never been easier to dispense both store bought beer and your own home brew off of the same system.
This Sankey to ball lock keg coupler adapter set allows you to switch your lines between commercial kegs and Cornelius home-brew kegs in seconds. It's as simple as screwing the conversion fittings onto your Sankey coupler and then installing your ball lock couplers on the posts.
There are many advantages to this beyond just being able to switch back and forth between Sanke kegs and Corny Kegs. Probably the biggest advantage is you don't have to mess with the tubing connections like you would on a standard Sanke conversion kit. Also, you don't have to continually tap and untap the Sanke keg when switching back and forth. These Sankey to ball lock disconnects are the best solution for dispensing several beers you have on tap, at once.
WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Keg Coupler Adapter Kit - Gas and Liquid Posts Reviews
When connected to a liquid ball lock keg coupler (on top), how tall is the entire Sankey assembly? (I appreciate I will have to add another inch for the arc of the liquid tubing). I need to see if a commercial keg set up this way will fit in my kegerator.
by JDon April 26, 2019
the quick connect adds another 1 1/4" the ball lock coupler adds 2 1/4". Sankey couplers vary.
by Benon April 30, 2019
Unfortunately, it appears the additional height the adapter adds on the liquid side makes this too high for my Kegco kegerator to accept the ball lock connector. I only have about 1 and 1/8 inch of height to work with and the liquid connector is taller than that. I use the typical D style coupler.
by Kennethon November 09, 2019
We have an elbow fitting that may help with the clearance issues you're experiencing.
Beer Elbow Fitting - Low Profile Out Model:BEFLP