UBC

Tayfun Horizontal 75 Ft. Glycol Chiller

Model:H35G-3/8
Regular Price: $1462.49
You Save $292.50
$1,169.99
+ FREE Shipping

The UBC H35G-3/8 Tayfun Horizontal 75 Ft. Glycol Chiller with a totton pump is an excellent glycol cooler. Glycol power pack comes equipped with a 1/3hp compressor and digital thermostat. This tayfun chiller includes a 5GI bath and has up to a 75' run distance.

A glycol chiller is the right solution if you're using a long-draw system - meaning you would like to have your chiller several feet away from where you plan to dispense. This system implements the power of glycol to move beer further distances, while still keeping it cold from keg to tap. Propylene glycol is combined with water to create a chilled mixture that's pumped from the glycol power pack through the cooling lines that run parallel to your beer lines. Propylene glycol, a non-toxic, food-grade antifreeze, is the main component that's been used for many years in food-processing systems. Glycol cooled draft beer dispensing systems are typically used in commercial applications such as bars, restaurants, and stadiums.

  • Glycol Power Pack 1/3HT Compressor
  • Totton Pump
  • Up to 75' run
  • 5Gl Bath
  • Digital Thermostat
  • Excellent Glycol Chiller / Glycol Cooler

Warning WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Glycol Chiller Specs
Maximum Distance75 ft.
Capacity2690 BTU/hr.
Glycol Tank Capacity5 gal.
Dedicated Circuit15 Amps.
Voltage115/60 volt/Hz.
Compressor Power3/8hp
Pump TypeTotton SPC42-90watt
Pump Flow Rate250 Gal/hr.
RefrigerantR134a
Dimensions
Height19"
Width27"
Depth18"
Weight
Unit Weight77 lbs.
Shipping Weight77 lbs.
PDFSpec Sheet

Tayfun Horizontal 75 Ft. Glycol Chiller Reviews

Average Customer Rating:
(5)
(based on 1 reviews) 
Solid Chiller
by:Dave (03-25-2016)
Bridgton, ME
Comments:I'm using this to control temperature on a 25 gallon stainless conical fermenter. It has more than enough capacity for my needs. It gives me room to expand. The unit is quality built. Easy to set up performs very well. I am very happy with this purchase.
Bottom Line:I would recommend this product.
 
Loading.....
Question:
Is this unit used to chill a tank?( brite tank with pull down of 1500 BTU/hr) Or is it only used for inline cooling.?
by Hazel grove sugar shack on September 09, 2019
Answer:
Its primarily used for line cooling. The BTU rating for a bright tank would be very different from a beer line. That would change the pumps power having to displace all that heat. I was told that the EG 3/4th that we sell would be a functional optional but then cooling multiple fermentors would strain the unit and to what extent, its unknown.
by Dave on September 09, 2019
Staff Answer

Labor - 12 Months

Parts - 12 Months

Compressor - 72 Months

The compressor is covered for 5 years from the date of purchase