Kalinka-Ice 25 Ft. Glycol Chiller

Regular Price: $1124.99
You Save $225.00
+ FREE Shipping

The KG-1/6T Kalinka-Ice 25 Ft. Glycol Chiller with a totton pump is the perfect glycol cooling system for ice towers. Glycol power pack comes equipped with a 1/6hp compressor and digital thermostat. This kalinka ice chiller includes a 2GI bath and has up to a 25' run distance.

A glycol chiller is the right solution if you're using a long-draw system - meaning you would like to have your chiller several feet away from where you plan to dispense. This system implements the power of glycol to move beer further distances, while still keeping it cold from keg to tap. Propylene glycol is combined with water to create a chilled mixture that's pumped from the glycol power pack through the cooling lines that run parallel to your beer lines. Propylene glycol, a non-toxic, food-grade antifreeze, is the main component that's been used for many years in food-processing systems. Glycol cooled draft beer dispensing systems are typically used in commercial applications such as bars, restaurants, and stadiums.

  • Compact Glycol Power Pack for ICE towers
  • Glycol Power Pack 1/6HP Compressor
  • Totton Pump
  • Up to 25' run
  • 2Gl Bath
  • Digital Thermostat
  • The Perfect Glycol Cooling System!

Warning WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Glycol Chiller Specs
Maximum Distance25 ft.
Capacity1150 BTU/hr.
Glycol Tank Capacity2 gal.
Dedicated Circuit10 Amps.
Voltage115/60 volt/Hz.
Compressor Power1/6hp
Pump TypeTotton SPC42-90watt
Pump Flow Rate250 Gal/hr.
Unit Weight38 lbs.
Shipping Weight38 lbs.

Kalinka-Ice 25 Ft. Glycol Chiller Reviews

Average Customer Rating:
(based on 0 reviews) 
No customer reviews available. Be the first to write a review!
What size are the glycol inlet and outlet ports? What connection type do they require?
by Timmy on November 21, 2018
Inlet and outlet ports are barbed nipple fittings for 3/8" poly tubing.
by Krystina on November 23, 2018
Staff Answer
How quickly does it get to optimum cooling temp?
by BubbleBro on June 30, 2019
Its tough to say because there are so many variables at play. Its best to contact UBC and see if they have trial run statistics on various setups to see rough numbers.
by Dave on July 03, 2019
Staff Answer

Labor - 12 Months

Parts - 12 Months

Compressor - 72 Months

The compressor is covered for 5 years from the date of purchase