The LG3500-1/2P Tayfun 125 Ft. Glycol Chiller with a Procon pump is an ideal glycol chiller. Glycol power pack comes equipped with a 1/2hp compressor and digital thermostat. The Tayfun chiller includes a 2GI bath and has up to a 200' run distance.
A glycol chiller is the right solution if you're using a long-draw system - meaning you would like to have your chiller several feet away from where you plan to dispense. This system implements the power of glycol to move beer further distances, while still keeping it cold from keg to tap. Propylene glycol is combined with water to create a chilled mixture that's pumped from the glycol power pack through the cooling lines that run parallel to your beer lines. Propylene glycol, a non-toxic, food-grade antifreeze, is the main component that's been used for many years in food-processing systems. Glycol cooled draft beer dispensing systems are typically used in commercial applications such as bars, restaurants, and stadiums.
Glycol Chiller 1/2HP Compressor
Up to 200' Run
Instant glycol chill through the Plate and Frame heat exchanger
Digital thermostat
Procon Pump, 100Gl/hr
2 Gl Bath
Ideal Glycol Power Pack / Glycol Cooling System
WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Glycol Chiller Specs
Maximum Distance
200 ft.
Capacity
3500 BTU/hr.
Glycol Tank Capacity
2 gal.
Dedicated Circuit
20 Amps.
Voltage
115/60 volt/Hz.
Compressor Power
1/2hp
Pump Type
Procon-100gl
Pump Flow Rate
100 Gal/hr.
Refrigerant
R134a
Dimensions
Height
28"
Width
13"
Depth
18"
Weight
Unit Weight
100 lbs.
Shipping Weight
100 lbs.
Tayfun 125 Ft. Glycol Chiller - Procon Reviews
Average Customer Rating:
(0)
(based on 0 reviews)
No customer reviews available. Be the first to write a review!
How long can beer "sit in the lines" between the Tayfun 125Ft Glycol chiller and the dispensing point at the bar? The distance between the keg and the dispensing point is going to be 105ft. What tubing and additional equipment is needed to build a 2 beer system where the kegs are in a walk in cooler 105ft from the bar?
by Allen Howellon December 10, 2018
Answer:
Hello Allen, When you have some free time. I would like for you to give me a call. I would be happy to discuss some options with you.
Ben 858-218-2339
by Benon December 11, 2018
Staff Answer
Labor - 12 Months
Parts - 12 Months
Compressor - 72 Months
The compressor is covered for 5 years from the date of purchase
WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.