September Savings | Up to 20% Off + Save Up to $400
Brew Demon

6-Gal Shedu Oatmeal Stout Refill


Named for the mythical man-bull, this strong bodied stout is rich and flavorful with a creamy finish. This signature series hopped malt extract (SS HME) contains malted barley, water, hops and yeast. No additives or preservatives. Signature series mixes are specially formulated complete recipes and require no additional adjuncts. These mixes feature complex blends of specialty malts, combined with the finest hops by master brewers in New Zealand's famous Speight's brewery, providing the optimum flavor profiles for world-class beers.


  • (2) 1.7kg cans of Shedu Oatmeal Stout (SS HME)
  • (2) 5g packet of Dry Brewing Yeast (under black lid)
  • (3) 44g packets of One Step No-Rinse Cleanser

Flavor Profile:

ABV : 4.6 %

Low : 0%
High : 13%

IBU : 28

Low : 0
Noticeable : 120

SRM : 40

Light : 0
Dark : 40

Brewing Note

Each recipe includes a packet of One Step No-Rinse Cleanser, enough to sanitize all your equipment during brewing and bottling. Sanitize everything that will come in contact with your beer before making this recipe.

Mr. Beer Brewers
After selling the company to their rival malt supplier, Mr. Beer had to reformulate all their malts. Before all that, this malt was sold as their "Select Series" Sticky Wicket Oatmeal Stout.

1. Sanitize As Directed
Thoroughly clean and sanitize all equipment by following the steps outlined in the instructions that came with your kit.

2. Making This Recipe
Our mixes contain malted extract and hops ready for fermentation. Just add water and the included yeast. Since beer is mostly water, the better the water the better your beer. This step should take about 30 minutes.

  1. Remove yeast packets from under the lid of your beer mixes and stand both cans in a tub of hot tap water. This will help it pour more easily.
  2. Fill your fermenter with 3 gallons of cold water. For best results, use bottled spring water or charcoal-filtered tap water.
  3. Place 3 quarts of water into a clean 8-quart pot and bring to a boil.
  4. Remove from heat. Then slowly stir in the contents from can until fully dissolved. This mixture is called the wort.
  5. Pour the wort into the fermenter. Bring the volume of the fermenter up to the 25-quart mark by adding more water. Mix thoroughly. Read the thermometer and wait until the temperature of the wort is between 64°- 82° F before adding the yeast.
  6. Add the yeast. Then attach your lid.
  7. Place the fermenter out of direct sunlight and maintain a temperature between 64°- 82° F for approximately 7-14 days.

3. Bottle As Directed
Follow the steps outlined in the instructions that came with your kit. You will need (24) 1-liter bottles for this size batch.


6-Gal Shedu Oatmeal Stout Refill Reviews

Average Customer Rating:
(based on 0 reviews) 
No customer reviews available. Be the first to write a review!

Be the first to ask a question.