Kegco Standard Party Beer Dispener Keg Tap Kit

Model: S1PK
8 Reviews
$120.33SAVE 25%
$90.25

90 Day Money Back Guarantee
  • Kegco 542 Pro Series double gauge regulator has a large hand adjustment knob to easily set output pressure
  • Kegco KT85D-L "D" system keg coupler easily taps all North American store bought kegs
  • No shanks or towers to be installed - you just need a refrigerator large enough to hold a full size keg
  • Fast and easy way to have a kegerator in your home without having to drill through your refrigerator
  • Note: CO2 tank is optional add on and shown for reference purposes
DESCRIPTION
FEATURES
REVIEWS
Q&A

Thanks to Kegco's Standard Party Kegerator Kit, you can now have all of the convenient features of a home kegerator without the hassle of drilling through a refrigerator. Because this setup uses no shanks or towers, there is no installation required - all you need is a refrigerator large enough to hold a full size keg, and you'll be dispensing pour after pour of cold draft beer in no time! Unlike regular party pumps, your beer will not go flat if you cannot drink it all in one night, so you can enjoy delicious fresh taste until the last drop. The Standard Party Kegerator Kit has been designed with high quality commercial-grade parts that blend convenience and user-friendly performance with professional level power and craftsmanship, including a dual gauge regulator that allows you to easily monitor both the CO2 volume and the output pressure, and a lever handle coupler that is more durable and long-lasting than wing handle couplers.

Pro Series Dual Gauge RegulatorPro Series Dual Gauge Regulator:
Easily measure PSI and Co2 volume and adjust Co2 output pressure using this pro series dual gauge regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.

Lever Handle Keg CouplerLever Handle D System Keg Coupler:
This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.

Party FaucetParty Faucet Assembly:
This is a black plastic party pump squeeze faucet with two feet of black 3/16" I.D. beer line. This is the faucet you see installed on all picnic keg pumps. This faucet comes with a hex nut assembly that will attach to the top of all standard commercial keg couplers for easy assembly.

Note: CO2 tank is optional add on and shown for reference purposes

Warning WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

STANDARD PARTY KEGERATOR CONVERSION KIT COMPONENTS

  • (Optional) Aluminum 5 lb Co2 Tank
    We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.

  • LH-542 - PRO SERIES DUAL GAUGE CO2 REGULATOR
    Easily measure PSI and Co2 volume and adjust Co2 output pressure using this pro series dual gauge regulator packed with premium features! The chrome plated brass body has a large pressure adjustment knob for easy use, and includes both a manual pressure release valve and an integral tamper-proof safety pressure relief valve that releases at 45-psi.

  • 516BAL-5 - 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINE
    Our brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16" I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.

  • 516SNP - PLASTIC REUSABLE CLAMP FOR 5/16" ID TUBING
    This easy-to-use white plastic snap clamp fits 5/16" I.D. (9/16" O.D.) vinyl hose. A tooth-locking mechanism allows you to tighten the clamp without using tools, and the semi-rigid plastic design is reusable and will not corrode over time.

  • KT85D-L - D SYSTEM KEG TAP - BLACK LEVER HANDLE
    This NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.

  • PICNIC FAUCET WITH ATTACHED 2' BLACK BEER LINE
    This is a black plastic party pump squeeze faucet with two feet of black 3/16" I.D. beer line. This is the faucet you see installed on all picnic keg pumps. This faucet comes with a hex nut assembly that will attach to the top of all standard commercial keg couplers for easy assembly.

SPECIAL INSTRUCTIONS:

  • Some gas suppliers will not fill a CO2 tank, they will only exchange your CO2 tank for a full one. It is a good idea to find out what options are available in your area so that you don't buy one of our brand new high quality aluminum CO2 tanks, only to have it swapped out for a rusty old steel tank. If you are unsure where to get a tank filled in your area, you can try asking a local beer distributor or doing a local search for fire extinguishers and fire safety equipment. Companies that refill fire extinguishers are generally willing to fill a CO2 cylinder.
  • All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.
UPC: 608938443502

06/17/2020

Beer line too short
Bill

I'm using this as an in-fridge keg unit. No problems except that beer comes out like a raging stream with tons of foam. This is due to beer line being only 2 ft. 10 ft. of line would solve this problem. I keep my keg at 34 degrees, 10 psi pressure. Overall quality of components is great. But I suggest a longer beer line!

09/17/2015

Standard party beer dispenser keg tap
Chris

Great product. Simple to use. Instructions are easy to follow and very helpful. Performs perfectly. Only wish I had bought the tall stand dispenser.

11/10/2014

Keg tap set
Kenneth

Excellent product

06/30/2014

good buy but tap and gauges cheaply made
john

Good purchase. The trick is to find somewhere to fill the tank without exchanging it for a beat up steel bottle. I went to keller fire and saftey inc. 5 lbs for $12. I went to a home brew store with the kit to get some pointers and tips. He informed me that I was missing a ball and retainer clip from the tap. That would have ruined the party! A quick call and parts were on the way. Tap and gauges are cheaply made but still not disappointed for the $.



02/17/2014

Works Great!
Jeff B

I ordered the kit for our Super Bowl party, it was an excellent addition! No more pumping, and no more stale beer. I combined it with a keg insulated wrap. I hooked it up before the party, pretty easy with the clear instructions. It worked like a champ! The order arrived in good condition in 3 days.
I'll definately use The Beverage Factory for any future beer dispensing needs.

Showing Reviews 1-5 of 8
 1 2  

Be the first to ask a question.

Select Options & Upgrades

Optional CO2 TANK UPGRADE
Optional CO2 TANK UPGRADE
Kegco Standard Party Beer Dispener Keg Tap Kit $120.33 SAVE 25% $90.25
Standard Party Beer Dispener Keg Tap Kit
OPTIONS SUMMARY
OPTIONAL CO2 TANK UPGRADE
No Co2 Tank Selected
Base Price
$90.25
Options
Total

CONNECT WITH US!

@BeverageFactory
Added to Cart

.....