Taprite Commercial 2-Product Dual Gauge Primary Kegerator Regulator

This Taprite T742-2 Commercial 2-Product Dual Gauge Primary Kegerator Regulator is loaded with features! The regulator has a large hand control which makes it easy to adjust the pressure inside the keg. This is a dual gauge regulator with the main gauge indicating how much Co2 pressure is inside the keg and the second gauge indicating how much Co2 is left in your tank.

• Polycarbonate bonnet will not chip, break or fade.
• Non-adjustable "shut-down" built in to the body of regulator
• The high pressure ports have left-hand female threads to prevent their use as a lo-pressure outlet
• The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50 PSIG.
• Internal relief valve opens whenever delivery pressure exceeds set pressure by 15 PSIG. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced.
• Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts.
• Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed.
• Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The ball-type check valve helps prevent product back-up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16" I.D. pressure tubing.
• All regulators are pressure tested to assure in-field reliability.
• Seat assembly is easily replaceable in-field... no need to remove regulator from tank.