CellarPro 3200 / 4200 Low Humidity Duct Kit (Front) - Ducting Included

Custom Duct Hood for CellarPro 3200 and 4200VS Series Wine Cooling Units. With this kit, the cold air intake/exhaust can be ducted up to 100 equivalent feet (50 feet per opening). Recommended for use in low humidity environments. Please use our high-humidity duct kit if the system will be used in a warm, high humidity environment. Refer to the chart below for more information.

Duct openings are designed to attach to two 8-inch ducts for evaporator intake and exhaust. Custom design allows access to controls and switches on the face of the cooling unit.

Requires 9 inches of additional height at the front of the Cooling Unit.

Kit includes: Duct Hood and 50 feet (2x25) of 8-inch Insulated (R-6) Ducting.

CellarPro recommends the use of the remote control display kit together with the front duct kit. Please note: The high fan speed setting is recommended as the duct run increases in length.

  • Capacity:100 Equivalent Feet
  • Size:14.19w x 4.7d x 27.5h (in)
  • Weight:35 lb
  • Shipping Weight:35 lb
Commercial Configuration.