Four Product Secondary Co2 Regulator with Check Valves Reviews

07/07/2015

These regulators were a little more expensive than other brands but they feel solid and work great!

03/02/2015

This secondary regulator works great on our 4 tap kegerator. It is built heavy and is easy to use to regulate pressure to each of our 4 kegs. The only catch to this regulator - there is a nipple fitting on each end of the regulator and you must plug the end that is not in use or hooked to your primary regulator. The on/off valves below the regulator work well for switching kegs.

02/02/2015

There are two choices - the version with check valves has a barb on either end, with no shut off. I put a one foot length of hose that was tied off to keep my gas from escaping. I didn't want a "thru" version, but the check valves seduced me.

Take care to order the right product. I am very irritated.

01/19/2015

Mounted this on the outside of my kegerator. I have 6 kegs to regulate. I use the tank pressure to feed my highest carb level which is a root beer at 30psi. Then I usually have 2 kegs around the same pressure which share a regulator. I might add a fifth regulator so I don't have to share 1. These are very easy to add more onto. I took it out of the box and installed it with no leaks.

08/12/2014

These regulators were the best quality and the least expensive I found online. We received them quicker than expected. Will order from Beverage Factory again in the future.

03/18/2014

Very Nice secondary regulator. Does exactly what it should and no leaks. No problems at all.