Kegco Home Brew Beer Keg - Ball Lock 3 Gallon Strap Handle
These 3 Gallon Stainless Steel Ball Lock Kegs (aka Pepsi Kegs or Cornelius Kegs) are suitable for small refrigerators or on the road. The ball-lock fittings are easy to access, making cleaning very simple. These soda kegs meet NSDA voluntary standards and are NSF (National Sanitation Foundation) approved. The lid fastens tightly to the body and has a pull-ring style pressure release valve to easily depressurize the keg. Working pressure must not exceed 130 P.S.I.G.
Tanks is carried out by assembling : upper part (handle top), lower part (rubber bottom) and shell (calendared ferrule). The assembling of the different metallic parts is made by round and longitudinal welding. All welding on the tank are automatically made, following TIG system in a inert atmosphere without any deposit of material. On top of the tank, there is an oval opening (mouth) which allow the closing of the tank by the lid. On the bottom there is a sump to enhance the draining off. Printed on the stainless steel of the external surface of the body, there are information about the capacity of the tank, its identification numbers and the manufacturer. The lid is made of stainless steel, is finished with handle, and has a pull ring relief valve.
The tank model "NC" is made of AISI type 304 stainless steel (1.4301) with No. 2B mill finish steel sheet which fulfils ASTM A240 specification. All inside surfaces are smooth to prevent any possible dirt or contamination from remaining inside after washing and sterilizing. Stainless steel does not react to magnetic attraction and it's color does not change due to cleaning or sterilizing. The top and the bottom are deep-drowned beginning from a stainless steel disk with a thickness of 1mm before the pressing. The body has a thickness of 0,70 mm.
To allow quick disconnect with the draft beer system, on its upper part the tank is equipped with one liquid plug and one gas plug. The gas plug has an incision on the hexagon and the liquid plug does not have an incision on the hexagon. They are both clearly marked by a stencil.
On the top part of the tank there are two welded stems, trough which the gas tube and the liquid tube are putted inside the tank, and top which the plugs are fixed.
The bottom of the tank is covered with black hot vulcanised natural rubber bonded onto the steel. One stainless steel handle on the top offers easy handling. Four openings in the bottom skirt enhance the drain of water when the keg is upside down. The maximum outside diameter of the rubber part is larger than the one of the body. In this way any damage by impact is minimized and the keg can be rolled.
- Ball Lock fittings
- 304 Grade Stainless Steel
- Single strap handle.
- Approved by (NSF) National Sanitation Foundation
- Meets NSDA voluntary standards
- Made in Italy
- Capacity: 3 US Gal
- Weight: 2,70 kg ± 0.20 2
- Capacity till gas dip tube: 11,4 l ± 0.20
- 8.5"W x 16.5"H / 219 ± 2 mm W x 422 ± 2 mm H
- Plugs center line:172 ± 1 mm
|Dimensions and Capacity|
|Capacity||3 US Gal.|
|Material||304 Grade Stainless Steel|
Kegco Home Brew Beer Keg - Ball Lock 3 Gallon Strap Handle Reviews
|Average Customer Rating:|
|(based on 0 reviews)|
|No customer reviews available. Be the first to write a review!|
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.
|3 Gallon Ball Lock Strap Handle Keg||$124.99$99.99|
|Set of 2 ($97.97 per keg!)||$244.94$195.95|
|Set of 4 ($96.49 per keg!)||$482.49$385.99|
Sale Price: $195.95
Sale Price: $385.99
Sale Price: $275.99