Dispense like the pros at home with the Kegco HBK1XS-1 Home Brew Kegerator! This keg beer cooler is sturdily built, so it can stand up to the demands of commercial environments like a restaurant or tasting room, but it is small enough to easily move it around your home. It is ETL and ETL Sanitation Listed and NSF Compliant, ensuring that it has met the requirements of widely accepted product safety standards for draft beer dispensers. This kegerator has everything you need to dispense your own home brew recipes, including the keg! The pre-configured kit features upgrades like the aluminum 5 lb. CO2 tank with corrosion-resistant red finish, a Commercial Grade Double Guage Regulator and a polished stainless steel draft tower at no additional cost - a $25 value - and comes with a brand new, 304 grade stainless steel ball lock keg with a rubber carrying handle.
Manual Temperature Control
Easily set the temperature with a manual dial inside the cabinet
An interior fan provides rapid cool down and ensures consistent temperatures
Blower Hose for Air-Cooled Tower
Keep the beer line cooled all the way up to the back of the faucet
Knockout for external CO2 Tank mount
Use a larger tank or save room inside the cabinet by mounting the tank outside
Drip Tray Drain Receptacle
Any spills from the faucet are directed into this bottle for quick and easy cleaning
Behind these walls lies foamed in place polyurethane insulation to maintain steady temps
Diamond Plate Floor
This durable plating can withstand the punishment of frequent keg changes
The stainless steel cabinet features 4" locking casters, a knockout that allows you to mount the CO2 tank externally, a diamond-plate floor and a brushed stainless steel top with a guard rail so that anything you place on top doesn't slide off. The built-in drip tray with drain receptacle and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure each beer is cold from the first pour to the last.
- Includes a brand new 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
- Includes Commercial Grade Double Gauge CO2 Regulator
This regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the keg. The side gauge measures the remaining volume of CO2 in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver.
- Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Worm Drive Clamps
This 5 foot length of 5/16" I.D. Blue Air/CO2 Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver.
- Includes Ball Lock Home Brew Keg Tap Complete Set
This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.
- Includes a 3" Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel. It comes complete with a chrome plated faucet with brass lever and 5 feet of 3/16 inch I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included.
- Includes Brand New 5 Gallon Ball Lock Home Brew Keg
Made of durable and sanitary 304 grade stainless steel, this Cornelius Pepsi keg has a permanently molded rubber bottom skirt and handles for easy carrying. The ball lock fittings can be easily accessed for cleaning and maintenance, and the stainless steel lid fastens tightly to the body and includes a pressure release valve.
- All dispensing accessories are UL recognized components
- Continuous Cold Air Channeled Through Tower to Ensure Cold Product
- Heavy-Duty Stainless Steel Top
- Built-In Drip Tray with Drain
- Stainless Steel Interior Walls and Ceiling
- Diamond plate floor in cabinet interior
- Magnetic Gasket Provides Positive Door Sealing
- Self-Closing Door with Lock
- Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
- CFC-Free Foamed-in-Placed Polyurethane Insulation
- Knockout for Remote CO2 or Nitrogen Tank
- Stainless Steel Finish
- ETL abd ETL Sanitation Listed for Commercial Use
|Unit Weight||143 lbs|
|Shipping Weight||187 lbs|
|Compressor (Parts Only)||5 Years|
|Keg Storage Capacities
|Full Size / 1/2-Barrel||Holds 1|
|Pony Size / 1/4-Barrel||Holds 1|
|1/4-Barrel Slim||Holds 2|
|5 gal. Ball/Pin Lock Keg||Holds 3|
|Draft Beer Tower
|Number of Faucets||1|
|Color / Material||Stainless Steel|
|Number of Doors||11|
|Accepts Custom Overlay Panel||No|
|Electrical Requirements||115V / 60HZ|
Single Tap Commercial Grade Home Brew Kegerator with Keg - Stainless Steel Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.