The Kegco HBK1XS-3 Triple Faucet Home Brew Kegerator includes everything you need to dispense your own home brewed beer. The dispense kit includes a Brushed Stainless Steel Three Faucet Draft Beer Tower, three sets of Ball Lock Keg Couplers, a Commercial Double Gauge CO2 Regulator with a 3-way Air Distributor and three 304 Grade Stainless Steel Home Brew Kegs with rubber handles. All in a durable commercial grade stainless steel beer dispenser that is designed to stand up to heavy use and consistently deliver cold draft beer, pour after pour!
Manual Temperature Control
Easily set the temperature with a manual dial inside the cabinet
An interior fan provides rapid cool down and ensures consistent temperatures
Blower Hose for Air-Cooled Tower
Keep the beer line cooled all the way up to the back of the faucet
Knockout for external CO2 Tank mount
Use a larger tank or save room inside the cabinet by mounting the tank outside
Drip Tray Drain Receptacle
Any spills from the faucet are directed into this bottle for quick and easy cleaning
Behind these walls lies foamed in place polyurethane insulation to maintain steady temps
Diamond Plate Floor
This durable plating can withstand the punishment of frequent keg changes
The stainless steel kegerator cabinet features rugged steel construction with a stainless steel top that incorporates a built- in drip tray with drain to collect spills. Heavy-duty insulation along with a 1/7 hp compressor, fan-forced cooling and a blower hose that directs cool air into the draft tower ensure that your beer will be dispensed cold from the first drop to the last. The self-closing door has a magnetic gasket to ensure a tight seal and features a security lock, so you can shut off your dispense system and lock the cabinet until you're ready for another beer. 4" locking casters allow you to easily move the kegerator and a knockout in the rear wall enables you to mount the CO2 tank outside the unit for quick viewing and easy adjustment. The draft system can dispense up to three kegs at a time, but the interior is big enough to hold up to four 5 gallon Cornelius kegs at a time, so you can keep a backup keg cold and ready to serve!
- Includes a brand new 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
- Includes Commercial Grade Double Gauge CO2 Regulator with 3-way Air Distributor
This regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the keg. The side gauge measures the remaining volume of CO2 in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver. A 3-way air distributor is included, allowing you to aspirate three kegs off of one CO2 tank and turn off any lines that are not being used.
- Includes four 5 foot, 5/16 Inch I.D. Blue Air Line Assemblies with Worm Drive Clamps
This 5 foot length of 5/16" I.D. Blue Air/CO2 Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver. One air line goes from the regulator to the distributor and three go from the distributor to the couplers.
- Includes Three Complete Sets of Ball Lock Home Brew Keg Taps
The complete ball lock home brew keg tap set includes both a gas in and beer out couplers for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.
- Includes a 3" Diameter Brushed Stainless Steel Three Faucet Draft Tower
This NSF-approved tower is a 3" diameter triple faucet metal draft tower made of brushed stainless steel. It comes complete with three chrome plated faucets with brass levers and three 5 foot, 3/16 inch I.D. clear beer lines. This tower is mounted using the gasket and four screws that are included.
- All dispensing accessories are UL recognized components
- Continuous Cold Air Channeled Through Tower to Ensure Cold Product
- Heavy-Duty Stainless Steel Top
- Built-In Drip Tray with Drain
- Stainless Steel Interior Walls and Ceiling
- Diamond plate floor in cabinet interior
- Magnetic Gasket Provides Positive Door Sealing
- Self-Closing Door with Lock
- Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
- CFC-Free Foamed-in-Placed Polyurethane Insulation
- Knockout for Remote CO2 or Nitrogen Tank
- Stainless Steel Finish
- ETL abd ETL Sanitation Listed for Commercial Use
Four keg configuration requires external CO2 Tank mount.
|Unit Weight||143 lbs|
|Shipping Weight||187 lbs|
|Compressor (Parts Only)||5 Years|
|Keg Storage Capacities
|Full Size / 1/2-Barrel||Holds 1|
|Pony Size / 1/4-Barrel||Holds 1|
|1/4-Barrel Slim||Holds 2|
|5 gal. Ball/Pin Lock Keg||Holds 3|
|Draft Beer Tower
|Number of Faucets||3|
|Color / Material||Stainless Steel|
|Number of Doors||1|
|Accepts Custom Overlay Panel||No|
|Electrical Requirements||115 V / 60 Hz|
Three Tap Commercial Grade Home Brew Kegerator - Stainless Steel Reviews
|Average Customer Rating:|
|(based on 0 reviews)|| |
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.