Kegco

Full Size Digital Kegerator - Black Cabinet with Stainless Steel Door

Model:K309SS-1
Regular Price: $866.20
You Save $173.24 (20%)
$692.96

The Kegco K309SS-1 Digital Beer Dispenser is a beautiful freestanding keg beer dispenser with a black cabinet and sleek stainless steel door. This Kegco K309SS-1 Kegerator has all the features you've come to appreciate from other high quality Kegco kegerators, such as attractive styling, a removable built-in drip tray that is easy to clean, a chrome guardrail that prevents glasses from sliding off the top, and easy rolling casters. Thanks to the digital temperature controls, you now have the ability to see your specific temperature setting and set it easily with the push of a button, in addition to having a wider available temperature range for more precise temperature control.

Digital Temperature Control

Enjoy more precise control over your kegerator's internal temperature thanks to the HBK309S-1K's digital functionality and wide 32°F-75°F temperature range. While many other kegerators utilize a manual dial that makes setting and adjusting the temperature guesswork, this kegerator features intuitive up and down controls that can adjust the temperature in 1 degree increments. The temperature can be easily viewed in Fahrenheit or Celsius on the clear LED display.


Wide Enough Temperature Range to Dispense or Ferment

Kegco's HBK309 Series uses fan-forced cooling to ensure even, consistent cooling throughout the cabinet. Boasting one of the coldest temperature ranges of any keg beer cooler on the market today, it can be set as low as 32 degrees to dispense delicious ice cold homebrew beer. It can also be set high enough for use as a fermentation chamber, making it perfect for home-brewers looking for a precisely controlled fermentation environment.


Large Interior

This beer keg refrigerator's spacious interior can accommodate up to three five-gallon home brew kegs, allowing you to tap one keg while keeping two more cool and ready to dispense. If you'll be using this kegerator as a fermentation chamber, it will also be able to fit a 6 gallon bucket or carboy with ease.


Deep Chill Function

Thanks to the HBK309S-1K's Deep Chill function, you can spend less time waiting for a warm keg to cool down and more time enjoying refreshingly cold home-brew beer! Just press the Deep Chill button, and the compressor begins working continuously for 24 hours to cool your keg to the desired temperature. Press the button again, and the kegerator is returned to its normal operation.


Converts to a Refrigerator with 2 Shelves

Not only can this multi-purpose unit be used as a homebrew beer dispenser and a fermentation chamber, but it also comes with two adjustable shelves that allow you to convert it into an all-refrigerator, providing extra refrigerated storage for food and beverages. The shelves can be spaced far enough apart to hold 2-liter bottles and gallon jugs, and because the unit can be set as low as 32 degrees, it is even suitable for wine bottle storage.


Locking Casters Provide Mobility

Whether your guests are in the dining room, the game room, or out on the patio, the HBK309S-1K's easy-roll casters make it easy for you to bring your home-brewed beer right to them! These casters can be locked down once the kegerator is in position, so it won't roll away again until you need it to.


This keg beer dispenser comes with a 5 gallon Cornelius ball lock keg and all of the equipment you'll need to tap it - you just add the beer! The included single-tap dispense system features a polished stainless steel draft tower, an empty aluminum CO2 tank with glossy red finish, a dual gauge regulator, and a complete ball lock home brew keg tap set.

* - Letting the Deep Chill function run for the full 24 hours may result in freezing of the keg.

  • Kegco K309B-1MDK-309SS-01 Keg Beer Refrigerator with Single Faucet Dispense System
  • Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
    This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
  • Includes Single Gauge Co2 Regulator
    This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
  • Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
    The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
  • Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
    This is a Commercial Grade Lever Handle Keg Coupler that works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
  • Includes a 3" Diameter Chrome Plated Metal Draft Tower
    The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a chrome plated faucet with brass lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
  • All dispensing accessories are UL recognized components
  • Converts to refrigerator 2 full-width wire shelves
  • Large enough to hold all full size kegs (Including Coors, Miller and many additional brands)
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal) and 1/6 barrels (5gal)
  • Matte black cabinet with stainless steel door
  • Stainless door has a protective film on it to prevent scratches during shipment. You can peel the film off once the kegerator is set up.
  • Digital temperature control keeps temperature in range of 32°F-75°F
  • A perfect option for dispensing beer, soda, kombucha or wine
  • Deep Chill function to quickly cool down warm keg
  • Easy roll casters for mobility
  • Removable built-in drip tray with grill to collect spills
  • Chrome guard rail to protect your mugs and glasses from sliding off
  • Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
  • 25% more energy efficient design saves you money each month!
  • Plugs into standard home outlet
  • UL Listed

Warranty Information:

  • 1 Year Parts and Labor
  • 5 Years on Compressor (parts only)
Single faucet keg configuration for kegerators

This kegerator can fit one Full Size, Pony, or Quarter Slim Keg, two 5 gallon commercial kegs along with one 5 gallon home brew keg or up to three 5 gallon home brew kegs.

Brand Full Size Pony Size Quarter slim 5 Gallon D System 5 Gallon Ball Lock 5 Gallon Pin Lock 5 Gallon Strap Handle
Kegco K199 1 1 1 2 2 2 2
Kegco K209 1 1 1 2 3 3 3
Kegco K309 1 1 1 2 3 3 3
Kegco HK38 1 1 2 3 3 3 3
Kegco XCK-1 1 1 2 4 4 4 4
Summit SBC677 1 1 1 2 3 2 3
Summit SBC635 1 1 1 2 3 3 3
Haier Kegerator 1 1 2* 2 3 3 3
Danby Kegerator 1 1 1 2 3 2 3
All Marvel Kegerators 1 1 1 2 3 3 3
Perlick HP15T 0 0 0 1 1 1 1
Perlick HP24T 0 1 0 2 2 1 2
Perlick HC24T 0 1 0 2 2 1 2
UBC Kegmaster 1 1 2 4** 3 4** 4**
Beverage Air BM23 1 1 2 3 4 4 4
Everest EBD1 1 1 1 2 3 3 3
Brand Full Size Pony Size Quarter slim
Kegco K199 1 1 1
Kegco K209 1 1 1
Kegco K309 1 1 1
Kegco XCK-1 1 1 2
Summit SBC677 1 1 1
Summit SBC635 1 1 1
Haier Kegerator 1 1 2*
Danby Kegerator 1 1 1
All Marvel Kegerators 1 1 1
Perlick HP15T 0 0 0
Perlick HP24T 0 1 0
Perlick HC24T 0 1 0
UBC Kegmaster 1 1 2
Beverage Air BM23 1 1 2
Everest EBD1 1 1 1
Brand 5 Gallon D System 5 Gallon Ball Lock 5 Gallon Pin Lock 5 Gallon Strap Handle
Kegco K199 2 2 2 2
Kegco K209 2 3 3 3
Kegco K309 2 3 3 3
Kegco XCK-1 4 4 4 4
Summit SBC677 2 3 2 3
Summit SBC635 2 3 3 3
Haier Kegerator 2 3 3 3
Danby Kegerator 2 3 2 3
All Marvel Kegerators 2 3 3 3
Perlick HP15T 1 1 1 1
Perlick HP24T 2 2 1 2
Perlick HC24T 2 2 1 2
UBC Kegmaster 4** 3 4** 4**
Beverage Air BM23 3 4 4 4
Everest EBD1 2 3 3 3

* - Using Wood riser for front keg

** - With external CO2 tank (3 with internal CO2 tank)


UPC: 608729691822
Dimensions
Height33"
Width23-11/16"
Depth23-15/16"
Weight
Unit Weight96.8 lbs.
Shipping Weight110 lbs.
Warranty
Labor1 Year
Parts1 Year
Compressor (Parts Only)5 Year
Key Features
Built-in CapableNo
Security LockNo
Keg CouplerYes
RegulatorSingle Gauge
CO2 Tank5 lb.
Cleaning KitNo
Outdoor UseNo
Commercial UseNo
Keg Storage Capacities
Full Size / 1/2-BarrelHolds 1
Pony Size / 1/4-BarrelHolds 1
1/4-Barrel SlimHolds 1
1/6-BarrelHolds 2
5 gal. Ball/Pin Lock KegHolds 3
5-Liter / Mini KegHolds 3
Exterior
CabinetBlack
Drip TrayYes
Guard RailYes
CastersYes
Draft Beer Tower
Number of Faucets1
MaterialChrome
Height12.25"
Diameter3"
Door
Color / MaterialStainless Steel
Number of Doors1
Door HandleRecessed
Field ReversibleYes
Accepts Custom Overlay PanelNo
Cooling System
TypeCompressor
Defrost SystemManual
Front VentilationNo
Controls
Adjustable ThermostatYes
DigitalYes
Electrical
Electrical Requirements115v/60hz
Running Amps1.7 A
PDFInstruction Manual
PDFDispense Kit Assembly Manual
PDFParts Diagram
PDFEnergy Guide

Full Size Digital Kegerator - Black Cabinet with Stainless Steel Door Reviews

Average Customer Rating:
(5)
(based on 119 reviews) 
No regrets
by:DB (11-01-2017)
Whiteville,NC
Comments:Having recently gotten back into homebrew, getting this kegerator was the next step. I have the 3 faucet tap. First, this came well packed on a small wooden palette and boxed up. Unpacking was easy. Putting castors on was a cinch too. The Perlick 650ss with flow control are very nice. The brushed ss tower looks very nice and doesn't show any fingerprints. I added a tower fan and that is about the only noise I hear. No pops or anything like other brands have. It is very well built, I especially like the steel plate on the floor. Time will tell on how it holds up to the damp environment. As I said in another review, the gas tubing is a bit soft for my needs as I like worm gear tube clamps and mfl adapters, which didn't give a good seal. I would have paid for an upgrade to this, but I replaced it with the 3rd party brand at minimal cost, so all's well. Right now I have homebrew keg and a sankey with Highland Gaelic Ale. 3 batches in carboys now, so will add a third. Love that option. So far, absolutely no regrets on this purchase.
Bottom Line:I would recommend this product.
 
I liked it so much, I bought 2 more
by:Pumpkin King (09-13-2017)
Northwood, OH
Comments:You probably can't beat this kegerator for home use. I bought one 3 years ago, then another 2 years ago, and just got one this year. No problems with them at all. I like having the digital temperature gauge. No guessing what you have the kegerator set at. Multiple options for serving is awesome. I've put full size kegs in them, and sometimes run 2 sixth barrels in each.
Bottom Line:I would recommend this product.
 
Good product. Works as advertised
by:Ed (08-01-2017)
St Helens, OR
Comments:I will start that I simply don't like to give 5 star reviews, but this kegerator comes as close to deserving one as anything I have ever purchased.

I have the K309B-2 Dual Tap unit. I have the upgraded stainless tower and commercial pro dual gauge regulator while the rest of the components are stock.

PROS:

Very easy to set up and assemble. I had mine up and running within minutes (after unpacking and inspecting that is).

Temperature control is stable and truly is "set it and forget it.". Mine is set up in the garage where temps vary from high 50's at night to low 90's during the day, and I have no temp variation issues.

Fairly quiet operation, but I may not want it in my bedroom.

Sturdy build (mostly. More on that later).

Lots of room inside. This EASILY fits the 5lb CO2 bottle, large dual gauge regulator, Two 1/6 barrel kegs, and the associated lines with room to spare.

CONS:

While this is arguably the best kegerator out there for the money, and I would argue in favor of that point, in order to really make this unit shine you need to spend a little more. A number of reviews I read during my research phase complained about the stock/included faucets sticking, and mine were no different. Within the first day of use one of mine stuck, though I eventually worked it free, and after the first keg went through that side it is now jammed and nonfunctional. Just assume, or even do it when you purchase it, that you will end up upgrading the faucets sooner than later. I will be ordering Perlicks very soon.

The unit itself is fairly sturdy and well constructed. There is some "wobble/flexing" of the tower and it would have been nice to have a little more solid foundation to mount the tower to, but it does sit securely and while not truly a CON, it is worth noting so that you won't be surprised.

I had a couple of small issues on the CO2 side, one with the connection between the tank valve and the regulator, which was blowing by at a very fast rate. This was solved by simply removing the regulator and rotating the bushing and re-installing. Also, the regulator feels "crunchy" when turning the handle and experience tells me that this isn't a good thing for regulators to feel like, but I am not sure if this is an actual issue or not. After the initial setting/adjusting of the pressure I did have a situation where the next morning my pressure had creeped back to 0-1psi and I had to increase it again. That said it has been holding right at 9-10psi like champ since then.

Overall I would highly recommend this to anyone out there looking for a home kegerator in spite of some of the smaller things I pointed out. I did quite a bit of research and turned up a number of issues and complaints about foaming, needing to add additional insulation, tower cooling, etc. None of that was a problem for me and it was literally about as plug and play as you can get. Beer pours VERY COLD (I keep mine at 36F) and little or no waste from running foam from the lines before you can make a good pour. Well worth the money.
Bottom Line:I would recommend this product.
 
Great Setup!!!!
by:Andy (06-12-2017)
Detroit, MI
Comments:Worth every penny. Quality Refer unit and Tap components. Pours beautifully. I upgraded my regulator, tap, tower and coupler one level and only paid the price difference. My only mistake was going with a single tap unit... now I want a double!
Bottom Line:I would recommend this product.
 
Works well, good overall design
by:Rmikeburns (04-13-2017)
NC
Comments:First let me say that the customer service at the Beverage Factory does a good job. I was immediately transferred to the technical department who understood my problem and shipped a replacement part. I had a problem with one component and they promptly send a replacement to me without requiring the defective part be returned first, good customer service. The Kegco works well and seems to be a well constructed piece of equipment. I would give it a 5 star rating but it is not set up well on the 2 tap system for an external tank and a dual pressure gauge. You have to put everything inside the kegerator instead of outside, a relatively minor issue. I also with the hole in the back of the unit was a little larger to handle both the hose and a wire for a tower cooler but that is a another small issue. Overall a great product and great customer service. I will go to them for all my future purchases.
Bottom Line:I would recommend this product.
 
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.

 

Select Options

This product has multiple options. Please select options and then add to cart at the bottom of the page.

Item Qty Discount Price
Model: KC K309SS-1
Availability: In Stock
20%$692.96
Select Upgrade Options
SELECT TOWER
Chrome Plated Metal Tower (included) +$0.00
Polished Stainless Steel 12" Tower +$6.00
Brushed Stainless Steel 12” Tower +$11.00
Polished Stainless Steel 14.5" Extra Tall Tower +$11.50
Brushed Stainless Steel 14.5” Extra Tall Tower +$13.50
Remove Tower From Order (No Thanks, I Already Have One) -$15.00

SELECT FAUCET TYPE
Chrome Faucet / Brass Lever (included) +$0.00
Stainless Steel Faucet +$11.43
Perlick 630SS +$24.38
Perlick 650SS Flow Control +$36.88
Remove Faucets From Order (No Thanks, I Already Have One) -$5.00

SPECIFY KEG COUPLER (Kegerator Includes D System Coupler)
Stainless Steel D System Keg Coupler Lever Handle (Included) +$0.00
Stainless Steel S System European Keg Tap Coupler (Import Kegs) +$4.99
Stainless Steel D System Keg Coupler with Ergonomic Handle +$9.77
Perlick Lo-Boy Low Profile D System Keg Tap Coupler +$34.95
Remove Keg Coupler from Order (No Thanks Already Have One) -$10.00

SPECIFY CO2 REGULATOR (Kegerator Includes Single Gauge Regulator)
Pro Series Single Gauge Regulator (Included) +$0.00
Upgrade to Commercial Grade Dual Gauge Regulator +$12.00
Remove CO2 Regulator from Order (No Thanks Already Have One) -$10.00

SPECIFY CO2 TANK
5 lb. Co2 Tank (Included - Comes Empty) +$0.00
Upgrade to 5lb CO2 Tank with Electric Red Corrosion Resistant Epoxy Finish +$5.00
Upgrade to 10 lb. Co2 Tank (May have to Place Outside Unit) +$17.95
Remove Co2 Tank from Order (No Thanks Already Have One) -$35.00

OPTIONAL STAINLESS STEEL DRIP TRAY
Surface Mount Drip Tray - 3" Column Cut Out - No Drain +$59.99
Surface Mount Drip Tray - 3" Column Cut Out - With Drain (requires drilling a drain hole) +$69.99

OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
Optional CLEANING KIT! Add 1 Quart Hand Pump Cleaning Kit w/ 2 oz. Cleaner +$19.95
Add Deluxe Hand Pump Pressurized Cleaning Kit with 32 oz. Cleaner +$34.99
Add Complete D System Pressurized Cleaning Kit +$117.99

Add Residential Kegerator Cover
LIMITED TIME OFFER: Free Kegerator Cover With Purchase +$0.00

OPTIONAL TAP HANDLE UPGRADE (Standard Faucet Knob is Included)
Walnut Tap Handle with Black Chalkboard Surface +$38.95
Walnut Tap Handle with Green Chalkboard Surface +$38.95
Walnut Tap Handle with Dry Erase Surface +$39.95
Rustic Barnwood Tap Handle with Black Chalkboard Surface +$39.95

OPTIONAL FAUCET LOCK
Add Optional FAUCET LOCK Add Slide-on Faucet Lock +$41.99
Add Wrap Around Lock for Standard Faucets +$53.99
Add Wrap Around Lock for Perlick 600 Series Faucets +$53.99

CUSTOMIZE
I don't want any artwork on them +$0.00
Add a custom vinyl decal on your appliance Add to Order

Optional Extended Warranty
I don't want an extended warranty +$0.00
New Leaf ServicePro 1 Year Extended Warranty +$25.99
New Leaf ServicePro 3 Year Date of Purchase Warranty +$49.99
New Leaf ServicePRO 5 Year Date of Purchase Warranty +$107.99