Kegco Deluxe Homebrew 2 Kegerator Conversion Kit

The Kegco Deluxe Homebrew Kegerator Conversion Kit comes with beer parts you will need to successfully convert your refrigerator into a home brew dispenser. All the draft beer parts are of the highest commercial grade quality which are designed and built to last. The Deluxe kit features a Pro-Line double gauge regulator, a stainless steel drip tray and a heavy duty faucet wrench.

Our kegerator conversion kits come complete with detailed instructions and are supported by our friendly and experienced product specialsts. You can count on them for personalized attention both before and after your purchase.

KEGCO DELUXE KEGERATOR CONVERSION KIT COMPONENTS

• (Optional) Co2 Tank. We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.
• Includes Premium Pro Series Double Gauge Co2 Regulator w/ Air Splitter
  This premium pro series double gauge regulator is built with high end features! The premium pro series regulator works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn knob in the center is used to easily adjust the output pressure. The premium pro series double gauge Co2 regulator has a chrome plated brass body. This regulator also features a manual pressure release valve.
• Includes Two Seperate Assemblies of 5 feet of 5/16 Inch I.D. Draft Air Line Assembly with 2 Snap Clamps
  The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
• Includes Two Sets of Ball Lock Home Brew Keg Connectors for Ball Lock Kegs
  This is a set of two Ball Lock Home Brew Keg Connectors. This set includes both a gas in and beer out coupler that works with a ball lock Cornelius pepsi kegs. The Gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The larger hose barb makes it connect to the same size air line that standard draft beer regulators use. The Beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.
• Includes 2 Seperate 5 Foot Long Beer Line Assemblies
  These beer line assemblies come standard with 5' of 3/16" Clear Beer Tubing made of Themoplastic Vinyl Hose (Super Vinyl), one Plastic Snap Clamp (reusable clamp design) and a Coupling Assembly of 1 Stepless Clamp.
• Includes Two 4-1/8" Long Shank with Nipple Assembly
  This shank is 4-1/8" long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut. 3/16" ID beer line connection.
• Includes Two Chrome Beer Faucet with Brass Lever
  This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a Teflon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
• Comes with two black ABS plastic Faucet Knob.
• Includes Two 6" Stainless Steel Drip Tray with Back Splash (No Drain)
  The DP117 is a all stainless steel door mounted driptray. This drip tray is 6" wide and is mounted do the door through two screw holes on the backsplash. There is no drain on this drip tray, so it will have to be manually emptied. This drip tray is popular due to its clean design and durability. Two mount screws are included. The top vent comes off for easy cleaning.
• 2 Fiber Washer that is placed between regulator and Co2 Tank. This washer is optional. You can pick up additional washers when you get you tank filled.
• Heavy Duty Specialty Faucet Wrench
  This Heavy Duty vinyl coated handle specialty faucet wrench is used to connect the shank to the faucet. To properly tighten the faucet to the shank without leakage, requires this wrench that hooks into the holes on tightening colar. This faucet wrench is needed to remove faucet for cleaning or if you are switching to a stout faucet.
• Detailed Instruction/Installation Manual.
• All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.