Kegco Economy Homebrew Party Kegerator Kit

Regular Price: $81.19
You Save 20%
$64.95

Do you want to impress your friends and family with delicious homebrew beer at your next party, but aren't ready for a permanent kegerator? Don't settle for regular party pumps that allow your beer to go flat if it isn't finished in one night, get Kegco's Economy Party Kegerator Kit instead! All you need is a refrigerator large enough to hold a full size homebrew keg, and you can easily wow your guests with refreshing home brew beer that will remain cold and fresh until the last drop. There are no shanks or towers used in this dispense system, so there is no installation required, and thanks to Kegco's commitment to using only high quality commercial grade parts that have been designed and built to last, you can be confident that your home-brew beer is in great hands.


Pro Series Single Gauge RegulatorPro Series Single Gauge Regulator:
This pro series regulator features an easy to read Co2 gauge that allows to to quickly see what your output pressure is set at and a large hand control that allows you to effortlessly adjust the pressure inside your keg. The chrome plated brass regulator has a manual pressure release valve as well as an integral tamper-proof safety pressure relief valve that releases at 45-psi.

Ball Lock Home Brew Keg Tap Complete SetSelect between Ball Lock or Pin Lock Couplers:
Choose either ball lock couplers to tap Cornelius Pepsi kegs or pin lock couplers to tap Coke kegs. Both sets include both a gas in and beer out coupler for easy tapping of home brew kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.

Party FaucetParty Faucet Assembly:
This is a black plastic party pump squeeze faucet with two feet of black 3/16" I.D. beer line. This is the faucet you see installed on all picnic keg pumps. This faucet comes with a hex nut assembly that will attach to the top of all standard commercial keg couplers for easy assembly.

  • (Optional) Aluminum 5 lb Co2 Tank
    We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks.

  • LH-541 - PRO SERIES SINGLE GAUGE REGULATOR
    This pro series single regulator features a Co2 gauge and a large hand control for easy monitoring and adjustment of Co2 pressure inside your keg. The chrome plated brass regulator has a manual pressure release valve as well as an integral tamper-proof safety pressure relief valve that releases at 45-psi..

  • 516BAL-5 - 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINE
    Our brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16" I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.

  • 516SNP - PLASTIC REUSABLE CLAMP FOR 5/16" ID TUBING
    This easy-to-use white plastic snap clamp fits 5/16" I.D. (9/16" O.D.) vinyl hose. A tooth-locking mechanism allows you to tighten the clamp without using tools, and the semi-rigid plastic design is reusable and will not corrode over time.

  • PICNIC FAUCET WITH ATTACHED 2' BLACK BEER LINE
    This is a black plastic party pump squeeze faucet with two feet of black 3/16" I.D. beer line. This is the faucet you see installed on all picnic keg pumps. This faucet comes with a hex nut assembly that will attach to the top of all standard commercial keg couplers for easy assembly.

  • SELECT BETWEEN BALL LOCK OR PIN LOCK COUPLERS
    Choose either ball lock couplers to tap Cornelius Pepsi kegs or pin lock couplers to tap Coke kegs. Both sets include both a gas in and beer out coupler for easy tapping of home brew kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.

SPECIAL INSTRUCTIONS:

  • Some gas suppliers will not fill a CO2 tank, they will only exchange your CO2 tank for a full one. It is a good idea to find out what options are available in your area so that you don't buy one of our brand new high quality aluminum CO2 tanks, only to have it swapped out for a rusty old steel tank. If you are unsure where to get a tank filled in your area, you can try asking a local beer distributor or doing a local search for fire extinguishers and fire safety equipment. Companies that refill fire extinguishers are generally willing to fill a CO2 cylinder.
  • All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.

UPC: 608938443519

Kegco Economy Homebrew Party Kegerator Kit Reviews

Average Customer Rating:
(4.5)
(based on 2 reviews) 
This only has one gauge
by:Cheflefty (03-12-2015)
Arnold ca
Comments:I bought second gauge later as an after thought which worked fine but I would have saved time and money just getting a total of 2 gauges the first time see my review, titled"get 2 gauges" this system only come with one gauge.
Bottom Line:I would recommend this product.
 
great
by:Knotyet (06-12-2014)
WA Pennsula
Comments:Home brewing
Bottom Line:I would recommend this product.
 
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.

 

Select Options

This product has multiple options. Please select options and then add to cart at the bottom of the page.

Image Item Description Qty Discount Price
Kegco Economy Homebrew Party Kegerator Kit Kegco Economy Homebrew Party Kegerator Kit
Model: BF EHPK
20%$64.95

Confirm Options:

Review and Confirm Options below to Continue to Checkout
Select GAS & LIQUID CONNECTORS Option
Ball Lock Home Brew Keg Tap Complete Set +$0.00
Pin Lock Home Brew Keg Tap Complete Set +$0.00

OPTIONAL Co2 TANK (Required if you don't already own one)
No Co2 Tank Selected +$0.00
Select 2.5 lb. Aluminum Co2 Tank +$55.99
Select 5 lb. Aluminum Co2 Tank +$56.95
Select 10 lb. Aluminum Co2 Tank +$84.99
Select 15 lb. Aluminum Co2 Tank +$94.99
Select 20 lb. Aluminum Co2 Tank +$114.99

OPTIONAL HOMEBREW KEG
Brand New - Kegco 3 Gallon Strap Handle Keg +$89.99
Brand New - Kecgo 5 Gallon Strap Handle Keg +$94.99
Brand New - Kegco 5 Gallon Rubber Top Keg +$101.99
5 Gallon Ball Lock Keg - Reconditioned Beer Keg +$69.99