Three Product Secondary Co2 Regulator

Regular Price: $156.19
You Save $31.24 (20%)
Specify Model:
This Taprite T1683ST Three Product Secondary Co2 Regulator is used when you are attempting to dispense two or more kegs off of the same Co2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually.
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.
  • Body parts are 1/4" NPT (F).
  • Outlet fittings feature Taprite 1600 ball type shut-off. Fits 5/16" I.D. pressure hose. Inlet designed for 5/16" I.D. pressure tubing.
  • All models have heavy duty stainless steel wall mounting brackets.
  • Maximum delivery pressure: 50 PSIG
  • Non-removable adjusting screw limits maximum delivery pressure to 50 PSIG
  • Front loading seat assembly is easily replaceable in the field.
  • All regulators are pressure tested for leaks and defects prior to delivery to assure in-field reliability.
  • Available in multiple pressure and product models.

Three Product Secondary Co2 Regulator Reviews

Average Customer Rating:
(based on 5 reviews) 
Love this thing, for me it's essential
by:Rev2010 (11-26-2014)
Comments:Got this when ordering my kegerator so I could control the psi of each homebrew keg individually. Works great! Simple to use, knobs lock into place when pushed in, no sticking gauge needles or anything, etc. Just straight forward and simple.
Bottom Line:I would recommend this product.
Works well
by:PaulKegger (11-10-2014)
Healdsburg, CA
Comments:This is a usefull product and fulfills what I needed. The only challenge is the pull out knob that is hard to get a good and fine set on the pressure when pushing the knob back in..... Decent value for the need.
Bottom Line:I would recommend this product.
Good Product
by:bhambrew (07-24-2014)
Bellingham, WA
Comments:This bank of regulators was larger than I expected, but still fit inside my kegerator. The big knobs are easy to operate, and can be 'locked' in position to prevent unwanted adjustment.
Bottom Line:I would recommend this product.
by:Chris (01-29-2014)
Tucson, AZ
Comments:Works to perfection. Easy to install and adjust. High Quality.
Bottom Line:I would recommend this product.
Perfect for multiple keg systems
by:Pele (01-03-2014)
Atlanta, GA
Comments:High quality product that allows three different kegs to have different CO2 pressures. It is well built as compared to cheaper substitutes. With the three product CO2 regulator, I converted my single faucet draft tower on a Danby kegerator into a three faucet draft tower. Since the regulator is installed inside my kegerator, I can force carb and serve beer without moving any of my three kegs. I recommend this for anyone who is not satisfied with drinking 1 type of beer out of their kegerator.
Bottom Line:I would recommend this product.
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.