Taprite T1694ST Four Product Secondary Co2 Regulator

Regular Price: $212.44
You Save $42.49 (20%)
$169.95
Specify Model:
This Taprite T1694ST Four Product Secondary Co2 Regulator can be used when you are attempting to dispense two or more kegs off of the same Co2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually.
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.
  • Body parts are 1/4" NPT (F).
  • Outlet fittings feature Taprite 1600 ball type shut-off. Fits 5/16" I.D. pressure hose. Inlet designed for 5/16" I.D. pressure tubing.
  • All models have heavy duty stainless steel wall mounting brackets.
  • Maximum delivery pressure: 50 PSIG
  • Non-removable adjusting screw limits maximum delivery pressure to 50 PSIG
  • Front loading seat assembly is easily replaceable in the field.
  • All regulators are pressure tested for leaks and defects prior to delivery to assure in-field reliability.
  • Available in multiple pressure and product models.

Taprite T1694ST Four Product Secondary Co2 Regulator Reviews

Average Customer Rating:
(5)
(based on 4 reviews) 
Excellent Secondary Regulator
by:Bo (03-02-2015)
Lidgerwood, ND
Comments:This secondary regulator works great on our 4 tap kegerator. It is built heavy and is easy to use to regulate pressure to each of our 4 kegs. The only catch to this regulator - there is a nipple fitting on each end of the regulator and you must plug the end that is not in use or hooked to your primary regulator. The on/off valves below the regulator work well for switching kegs.
Bottom Line:I would recommend this product.
 
Product works as described.
by:E McKishen (01-19-2015)
NJ
Comments:Mounted this on the outside of my kegerator. I have 6 kegs to regulate. I use the tank pressure to feed my highest carb level which is a root beer at 30psi. Then I usually have 2 kegs around the same pressure which share a regulator. I might add a fifth regulator so I don't have to share 1. These are very easy to add more onto. I took it out of the box and installed it with no leaks.
Bottom Line:I would recommend this product.
 
quality, best price, prompt delivery
by:Tom (08-12-2014)
Jacksonville, FL
Comments:These regulators were the best quality and the least expensive I found online. We received them quicker than expected. Will order from Beverage Factory again in the future.
Bottom Line:I would recommend this product.
 
Excellent Product!!
by:RB (03-18-2014)
Springfield, MO
Comments:Very Nice secondary regulator. Does exactly what it should and no leaks. No problems at all.
Bottom Line:I would recommend this product.
 
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.