Full-Size Keg Beer Dispenser with Black Cabinet and Black Door

Regular Price: $554.99
You Save $111.00 (20%)

The Kegco K199B-1 Kegerator is a great Single-Tap Full Size Keg Beer Dispenser at an excellent value price! Preferred by many brewers, these keg dispensers come equipped with a complete Direct Draw Beer System for D System Domestic Kegs. This Beer Cooler houses your Kegs in an All-Black Cabinet with an Elegantly Designed Field Reversible Black Door. Two Removable Wire Shelves allow you to easily convert this beer fridge into an All-Refrigerator or Beverage Center. With 2-1/2" Casters, you can move these kegerators to any room in your home, from the Kitchen, to the home bar, to the Mancave. The K199B-1 is sure to be talked about at your next dinner party or sporting event! Enjoy your meal and or game with an ice cold Draft Beer served directly from your new Kegerator!

Commercial Keg Setup.

This Kegco K199B-1 has all the necessary equipment you need to dispense cold draft beer straight from the keg, including a 15" Chrome Plated Draft Beer Tower, Sankey Keg Coupler, 5lb Aluminum Co2 Tank, and Single Gauge Regulator. The Regulator measures Pounds Per Square Inch (PSI), and features a Safety Blow Off at 55-65 PSI, flow control inlet nipple filter, and permanent Quad-Ring Inlet Seal. The Sankey Keg Coupler is designed to fit most of your favorite Domestic beer kegs. Please Note:This aluminum 5 lb. Co2 Cylinder is the preferred size for many brewers due to it's lightweight. It ships empty and does not come filled, so you will need to get it filled locally. The 5 lb. tank is good for about 5-6 full-size kegs when filled.

Home Brew Setup.

These Keg Coolers are created for in home use, and their quiet performance and energy-efficient design make them even better for storing kegs in your home than some other beer coolers. Though quiet and energy efficient this Kegerator has the capacity to hold Full-Size Kegs (15.5 gal), 1/4 Beer Barrels (7.75 gal), and 5 gallon kegs.

Additional Features of this Single Faucet Full-Size Kegco K199SS-1 Kegerator includes a Removable Drip Tray that collects spills, a Stainless Steel Interior floor mat for long lasting durability and easy glide of beer keg, beer tubing, a gas hose, clamps, washer, a textured serving counter-top and an attractive Metal Guard Rail that helps prevent your glasses and beer mugs from sliding off.

Keg Capacity Chart.

Does Not Fit These Kegs.This keg refrigerator will hold one Full Size, Straight Pony or Quarter Slim Keg and up to two Sixth Slim, Strap Handle or Rubber Home Brew Kegs. Please Note: It will not fit Bevel or Rubber Kegs that are wider in the middle than at the top or bottom. These are commonly used by Coors and Miller Brewing Companies.

  • MDK-199B-01 Kegerator with Single Faucet Dispense System
  • Black Cabinet with a Decorative Black Door
  • This Keg dispenser comes with a complete Direct Draw Kit for a D System Kegs. This Keg Tap system comes with all the commercial grade components needed to tap a domestic keg.
  • Includes a brand new aluminum 5 lb. Aluminum Co2 Tank
    This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
  • Includes Single Gauge Co2 Regulator
    This Regulator works with any Co2 Tank with a CGA-320 valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve R82. Female CGA-320 connection. Ball valve outlet w/ 5/16" OD Hose Barb connection. Total ports = (2) Primary 1/4" FNPT ports, (2) Secondary 1/4" FNPT ports. UL Listed, Compressed Gas Regulator - for use w/ Air, Co2 and Inert Gases.
  • Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
    The standard length is 5 feet of 5/16" I.D. Blue Air/Co2 Tubing made of Themoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design.
  • Includes D system Lever Handle Keg Coupler which can Tap all Domestic Kegs
    This is a Commercial Grade Lever Handle Keg Coupler. The K199B-1 is compatible with all domestic brand kegs. This Keg Tap works with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
  • Includes a 3" Diamter Chrome Plated Metal Draft Tower
    The Tower is a commercial grade Single Column, Single Faucet, 3" Diameter, Chrome Plated Metal Draft Tower. This Tower comes complete with a chrome plated faucet with brass lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
  • Includes Chrome Beer Faucet with Brass Lever
    This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a nylon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handles.
  • PLEASE NOTE: Coors Kegs will not fit into this Kegerator.
  • Measures at 33"H x 20"W x 25.5"D
  • Reversible Door
  • the Kegco K199B-1 Beer Dispenser comes with 2 full-width wire shelves and a hole plug which allows you to convert kegerator into a Compact Refrigerator.
  • Includes 2 Full-width Wire Shelves
  • Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
  • Removable Drip Tray with Grill to Collect spills
  • Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
  • Stainless Steel interior floor mat for long lasting durability and easy glide of beer keg.
  • Textured serving counter top.
  • 25% more energy efficient design saves you money each month
  • UL Listed
  • 1 year parts and labor.
  • 5 years on compressor (parts only)

UPC: 608938598189
Key Features
Built-in CapableNo
Security LockNo
Keg CouplerYes
CO2 TankYes
Cleaning KitNot Included
Outdoor UseNo
Commercial UseNo
Keg Storage Capacities
Full Size / 1/2-BarrelHolds 1
Pony Size / 1/4-BarrelHolds 1
5-Liter / Mini KegHolds 2
CabinetBlack Cabinet
Drip TrayYes
Guard RailYes
Draft Beer Tower
Number of Faucets1
Height9 1/4"
Color / MaterialBlack
Number of Doors1
Door HandleRecessed
Field ReversibleYes
Accepts Custom Overlay PanelNo
Cooling System
Front VentilationNo
Adjustable ThermostatYes
Electrical Requirements115v/60hz
PDFInstruction Manual
PDFDispense Kit Assembly Manual
PDFParts Diagram

Full-Size Keg Beer Dispenser with Black Cabinet and Black Door Reviews

Average Customer Rating:
(based on 47 reviews) 
best bang for your buck!
by:Ozzie (01-12-2016)
York Harbor. Maine
Comments:I love the two sixth slim keg setup for beer choice and endless microbrew selections to choose from. The co2 setup is easy and get a thermometer to get the perfect temperature with no foam!
Bottom Line:I would recommend this product.
Simple, Quick, Easy, Great value!
by:Jeff (01-05-2016)
Mt. Laurel, NJ
Comments:Once you decide that a kegerator is the way to go, this company makes a quality product, great directions, simple and easy set up, and now I own two of them. I have never needed customer service because it just works. Isn't that what everyone wants?
Bottom Line:I would recommend this product.
Somewhat disappointing
by:Sandie (08-11-2015)
Comments:This was my husband's birthday gift after we completed our deck. It looks great, there was no damage. It foams really badly and pours slowly. I got larger CO2 tank and received the holder for the smaller one. They don't have a larger holder which is frustrating. Customer service with the foaming problem was not good so I googled solutions. It's better, still not good.
Bottom Line:I would not recommend this product.
First Kegerator, so far a great buy!
by:HWJ Magnificent (07-13-2015)
Corning, New York
Comments:Never had a kegerator before, this is my first. Started making my own beer a few years ago and really wanted to try home-brew kegs. Did a little research before purchasing. Learned that with some of the other brands that are on the market, frequent complaints about the kegerator are that they can make loud noises, don't chill the beer cold enough, and can be difficult to regulate the pour. Also common complaints are the length of time for shipping and receiving and often the damage that happens in the shipping process. I read the reviews on the Kegco K199B-2 and it rated pretty well by most reviewers so I was convinced to go ahead with my purchase, my only hesitation was that I live in New York and this product was being shipped from San Diego, CA. In the back of my mind I'm thinking that it will take a month to arrive and will probably suffer all kinds of damage. Well let me just say that I was in complete shock when I received a phone call 5 days after placing my order, from a local trucking company wanting to know when they could drop off my kegerator. The kergerator went by air freight from San Diego to New York and was at the trucking company in 5 days and that was with a weekend in there. The trucking company delivered it to my garage, it was on a pallet. Upon inspection, I found it to be in perfect condition. No scratches, no dents, do dings, and all extra parts present and accounted for. Next test, how loud is it going to be? Well I can't even tell that it's running. I can't hear it come on or go off; it doesn't make any loud popping sounds like other kegerators. I set the temperature on the highest setting and stuck a thermometer inside, let it run for a day, the temperature was at 28degrees, bumped it down to the next setting and got it to 31 degrees. No problems with getting this kegerator to a nice cold temp. I tapped my first Micro Brew Sixth Slim keg and after adjusting the PSI and temperature, have been super successful with one beautiful pour after the next! Now I'm looking forward to tapping my own home brew. I've not owned this for very long but so far this has been a great kegerator.
Bottom Line:I would recommend this product.
Great appliance !!
by:Neto (06-16-2015)
El Paso, TX.
Comments:Works great, nice to have draft beer at home, very quiet.
I was surprised of the low temps it can deliver.
Ordered it with the 5 lbs. CO2 tank (enough for me), (2) 5 gal kegs and dual regulator, it all arrived as described.

KEGCO can put more effort on the instructions/manuals and parts supplied, it was not rocket science to put all together but clearer comments would help.

Thanks to all the internet folks who describe how to cool the beer tower, the only addition I made was to install a couple of 1/2" copper pipes to keep the beer lines cool, sprayed the inside of the tower with poly foam and that was it: a cheap way to keep your beer cool all the way from the keg to your glass...

Now I'm happy-pouring brown ale and stout !!!

Bottom Line:I would recommend this product.
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.

Labor - 12 Months

Parts - 12 Months

Compressor (Parts Only) - 60 Months


Select Options

This product has multiple options. Please select options and then add to cart at the bottom of the page.

Image Item Qty Discount Price
Full-Size Keg Beer Dispenser with Black Cabinet and Black Door Model: KC K199B-1
Availability: In Stock

Confirm Options:

Chrome Plated Metal Tower (Included) +$0.00
Polished Stainless Steel 3" Tower +$10.00
Polished Stainless Steel 3" Tower (100% Stainless Contact) +$25.00
Polished Stainless Steel 3" Tower with Perlick 630SS +$35.00
Remove Draft Tower from Order (No Thanks Already Have One) -$15.00

SPECIFY KEG COUPLER (Kegerator Includes D System Coupler)
Default D System Keg Coupler Lever Handle (Included) +$0.00
Select a S System European Keg Tap Coupler (Import Kegs) +$5.00
Select Ball Lock Home Brew Keg Tap +$0.00
Select Pin Lock Home Brew Keg Tap +$0.00
Select Perlick Lo-Boy Low Profile D System Keg Tap Coupler +$34.95
Remove Keg Coupler from Order (No Thanks Already Have One) -$10.00

SPECIFY CO2 REGULATOR (Kegerator Includes Single Gauge Regulator)
Pro Series Single Gauge Regulator (Included) +$0.00
Upgrade to Pro Series Dual Gauge Co2 Regulator +$9.00
Upgrade to Premium Dual Gauge Co2 Regulator +$10.00
Upgrade to Commercial Grade Dual Gauge Regulator +$11.00
Remove CO2 Regulator from Order (No Thanks Already Have One) -$10.00

5 lb. Co2 Tank (Included - Comes Empty) +$0.00
Upgrade to 5 lb. Tank with Red Finish +$5.00
Upgrade to 10 lb. Co2 Tank (May have to Place Outside Unit) +$17.95
Remove Co2 Tank from Order (No Thanks Already Have One) -$35.00

OPTIONAL 2ND KEG COUPLER (If you Plan on Tapping Import or Home Brew Kegs)
Select D System Keg Tap - Black Lever Handle - KT85D-L +$25.95
Select S System Keg Tap Coupler - Black Lever Handle - KT86S-L +$31.99
Select Ball Lock Home Brew Keg Tap Complete Set +$14.99
Select Pin Lock Home Brew Keg Tap Complete Set +$14.99
Select U System Keg Tap Coupler - Lever Handle - CH5300U +$63.95
Select Perlick Lo-Boy Low Profile D System Keg Tap Coupler w/ Pressure Relief - 40030 +$55.95

OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
Optional CLEANING KIT! Add Economy Beer Line Cleaning Kit +$21.95
Add Beer Cleaning Kit - 1 Qt. Bottle w/ 33 oz. Cleaner +$54.99
Kegco Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner +$49.99
Add Complete D System Pressurized Cleaning Kit +$102.95

Add Residential Kegerator Cover
Kegco TX-2637 Residential Kegerator Cover +$49.99

OPTIONAL TAP HANDLE (Standard Faucet Knob is Included)
Chalkboard Beer Tap Handle +$38.95
White Board Dry Erase Beer Tap Handle +$39.95
T180-7 - Twist - 7" BOD (Branding On Demand) Tap Handle +$42.95
C150-6 - 6" BOD (Branding On Demand) Tap Handle +$15.95

Add Optional FAUCET LOCK Add Slide-on Faucet Lock +$41.99
Add Wrap Around Faucet Lock +$53.99

Brand New - Kegco 3 Gallon Strap Handle Keg +$89.99
Brand New - Kecgo 5 Gallon Strap Handle Keg +$94.99
Brand New - Kegco 5 Gallon Rubber Top Keg +$99.99
5 Gallon Ball Lock Keg - Reconditioned Beer Keg +$69.99

Add Residential Kegerator Cover
Kegco TX-2637 Residential Kegerator Cover +$49.99

Optional Extended Warranty
I don't want an extended warranty +$0.00
New Leaf ServicePro 1 Year Extended Warranty - Under 500 +$19.99
New Leaf ServicePro 3 Year Date of Purchase Warranty - Under 500 +$39.99
New Leaf ServicePRO 5 Year Date of Purchase Warranty - Under 500 +$79.99