A high-capacity pressure relief valve has been incorporated as an integral part of the Taprite CH5001 D System Keg Coupler body. This serves two purposes: first, when functioning with other relief devices in the system, it will prevent a keg from reaching pressures in excess of recommended working pressure. Secondly, it allows the user to relieve pressure when needing to prevent or correct dispensing problems.
Designed for maximum flow, it can be used for either single or series keg dispensing.
Short handle is ideal for 1/6 kegs.
Specially designed pressure inlet nipple eliminates the need for a coupling washer when used with standard NADS check valve.
Flow of gas is controlled by lever handle; in up position pressure is off, when down it is on.
Locate coupler onto the keg valve and rotate clockwise until secure. Pull the lever handle out and push down; this opens the keg valve and pressure inlet on the coupler. You are now ready to dispense.
The coupler can be quickly dismantled for cleaning and periodic service. No special tools required.
WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.