We are open for business, however our showroom is closed. Click here to read our Covid-19 Action Plan.
Kegco

2-1/8" Stainless Steel Nipple Shank - 3/16" I.D. Bore

Model:SHANK2-ASC
$20.15

This stainless steel shank is 2 1/8" long measured from the end of the threading to the end where the faucet attaches.

Stainless Steel has a strongly bonded oxide layer, so it is less susceptible to attack by acids, making it ideal for wine and cider dispensing in addition to beer.

A shank is used to attach a beer line to a faucet. The shank is mounted through a 1" hole in a wall, refrigerator door, cabinet, etc. The shank comes with a black flange on the front and a compression ring on the back. The compression ring is used to secure the shank to the mounting surface. All shanks come fitted with a tail piece for beer line connection. Faucet is not included. Larger and smaller sizes are available.

  • 2 1/8" Length (Measured from the end of the threading to the end where the faucet attaches)
  • 3/16" ID Beer Line Connection
  • Forged Brass Lock Nut
  • Black Plastic Flange
  • Faucet Coupling and Sleeve
UPC: 700697200652
PDFShank Spec Sheet
PDFCover Spec Sheet
PDFCoupler Spec Sheet
PDFCollar Spec Sheet
PDFRing Spec Sheet
PDFNut Spec Sheet

2-1/8" Stainless Steel Nipple Shank - 3/16" I.D. Bore Reviews

Average Customer Rating:
(0)
(based on 0 reviews) 
No customer reviews available. Be the first to write a review!
 
Loading.....
Question:
Will this work inside a dual tap tower? It appears to have the same dimensions as the one on my Danby Kegerator.
by Brewster on October 21, 2018
Answer:
No, this shank will not work inside of a tower. There are specific shanks that are used for towers.
by Krystina on October 22, 2018
Staff Answer
Question:
Will this fit through a 2'' wide wood in a kegerator?
by Rab on June 04, 2019
Answer:
Technincally it would be too short.

https://www.beveragefactory.com/draftbeer/faucets/stainless-steel-shanks/shank2-asc.html

take a look at picture 5/6 , might be better to get shank3 or shank4.
by Dave on June 07, 2019
Staff Answer
Question:
Will the connector fit perlick dispensers?
by Andreas on June 25, 2020
Answer:
Yes it will, this shank uses industry standard threads, and will fit the vast majority of faucets available.
by Nick on August 17, 2020
Staff Answer
Question:
What thread size is it?
by Hunter on September 01, 2020
Answer:
Hello, the thread size for this shank is 7/8"-14 (5/8" BSP).
by Dakota on September 03, 2020
Staff Answer