Kegco Three-Way Kegerator Beer Gas / Air Distributor

Model: AD3
2 Reviews
$46.65SAVE 40% - $18.66
$27.99

90 Day Money Back Guarantee
IN STOCK (usually ships within 24 hours)
  • Perfect for dispensing up to three different beer kegs at the same output pressure
  • 3/8" O.D. inlet barb fitting connects to the CO2 regulator using 5/16" I.D. gas hose
  • Three 3/8" O.D. outlet barb fittings connect to the keg couplers using 5/16" I.D. gas hose
  • Features three in-line shut offs
  • Built-in mounting holes for convenient mounting
DESCRIPTION
INFO & GUIDES
REVIEWS
Q&A

Kegco's Three-Way Air Distributor is the perfect solution for dispensing up to three different beer kegs at the same output pressure. Made of aluminum, the air distributor features one 3/8" O.D. inlet barb fitting that attaches to the CO2 regulator using 5/16" I.D. gas hose and three 3/8" O.D. outlet barb fittings that attach to the keg couplers using 5/16" I.D. gas hose. It also features two in-line shut offs and built-in mounting holes for convenient mounting.

  • Performance: 1 Pressure / 3 Keg
  • Manifold Material: Aluminum
  • Built-in mounting holes for convenient mounting
  • Inlet Connection: 3/8" O.D. (to fit 5/16" I.D. gas hose)
  • Outlet Connections: 3/8" O.D. (to fit 5/16" I.D. gas hose)
  • All connections are 1/4" NPT with right hand thread
Warning WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

03/04/2020

Solid
D. S.

Good quality. No leaks! Shut off levers are solid metal and are of much better quality and more robust than others I have used. I have 2 of these linked together for a 6 tap system and there is no noticeable differences in gas pressure throughout the units.

01/27/2017

Wonderful product
Harley Gary

My biggest concern was leakage. I tested it before install it in the new kegerator. Great! No leakage!

Question:
Do the outlets have check valves in them?
by CW on December 31, 2018
Answer:
They do not have check valves. Most keg couplers have a check valve to prevent liquid from going up into the gas line.
by Nick on January 02, 2019
Staff Answer
Question:
I have a 3 way kegerator I bought from beverage factory (hbk309x-3nk). I have this 3 way manifold but am not sure where to install it. Based on the way the kegs sit it appears the best location is on the chiller plate but not sure this is the recommended location. Where do you recommend installing this manifold for a 3 tap system? Thanks in advance for your help.
by Beer Guy on September 11, 2019
Answer:
Its up to you really, we dont recommend drilling screws into the wall to mount the air distributor. There is a good change you will hit a refridgerator line and destroy the unit. I recommend 3M stick tape with the velcro. Tap up along the wall or even to the top and it should hold the manifold to the wall, then when you want to pull it all out it can un velcro.
by Dave on September 13, 2019
Staff Answer
Question:
will this work with a nitro tank/line
by nitro on March 28, 2020
Answer:
Hello, this air distributor will work with nitro equipment.
by Dakota on August 20, 2020
Staff Answer
Question:
When connecting to a CO2 regulator, are there any tricks to calculating the PSI to each keg, or is the PSI value on the regulator still accurate per-keg coupler?
by Brook on September 26, 2022
Answer:
The AD3 air distributor sends the same pressure to all 3 kegs.
by Jake on September 28, 2022
Staff Answer

CONNECT WITH US!

@BeverageFactory
Added to Cart

.....