These Inventory Reduction beer keg dispensers come complete with all the necessary equipment needed to pour a cold, tasty glass of beer from up to three different kegs at once and feature 100% Stainless Steel Beer Contact. Included in the kit are a 5 lb. Aluminum CO2 tank, dual gauge regulator with a 3-way air distributor, four 5' air lines with snap clamps, three D System keg couplers with stainless steel probes and 3" diameter Stainless Steel draft towers with Stainless Steel shanks and faucets. This is a great opportunity to get a commercial grade kegerator with a complete direct draw kit at a value price.
This industrial-strength keg beer refrigerator is designed to withstand the demands of commercial use. Featuring an attractive stainless steel interior and exterior and a rubber floor mat that reduces the shock of the heavy kegs on the stainless steel floor, it is sure to provide reliable performance for years. Forced air refrigeration keeps the beer in the kegs ice cold and and hoses direct cold air into each beer tower to ensure the line is cooled all the way to the faucet. Built-in drip trays catch any drops after you fill a glass and route to an external drain, making daily maintenance a breeze. The hoses inside the cabinet that direct cool air into the draft arm and drain beer from the drip tray to an external drain are efficiently tucked out of the way.
This keg cooler has enough interior space to house three full-size kegs or a combination of smaller kegs. These kegerators include two heavy duty adjustable shelves, providing the ultimate in versatility. You can store cans and bottles or keep mugs chilled on one side while dispensing multiple smaller kegs from the other side! Lights inside the unit conveniently illuminate the cabinet to make adjustments to your dispense system effortless. The cooling unit is serviceable from the front of the kegerator, allowing it to be used in both freestanding and built-in applications.
Includes a brand new aluminum 5 lb. Aluminum CO2 Tank
This Tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for CO2 Regulators. Average fill good for 5-6 Kegs depending upon your fill. (5.5" diameter, 18.25" Height).
Includes Dual Gauge CO2 Regulator and Brass 3-Way Air Distributor
Easily measure PSI and Co2 volume and adjust Co2 output pressure using this dual gauge regulator! The chrome plated brass body has a large pressure adjustment knob for easy use, and includes both a manual pressure release valve and an integral tamper-proof safety pressure relief valve that releases at 45-psi.
Includes four 5 foot, 5/16 Inch I.D. Blue Air Line Assemblies with Snap Clamps
The standard length is 5 feet of 5/16" I.D. Blue Air/CO2 Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. Each air line assembly comes with two Plastic Snap Clamps with a reusable clamp design. Four lines are provided to run one line from your regulator to your air distributor and three other lines from the distributor to the keg couplers.
Includes three D system Lever Handle Keg Couplers which can Tap all Domestic Kegs
These are Commercial Grade Lever Handle Keg Couplers that work with all American "D" System Sankey Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a stainless steel keg probe. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg.
Includes two 3" Diameter Stainless Steel Draft Towers
These are commercial grade single column, 3" diameter, Stainless Steel Draft Towers. A single faucet and a dual faucet tower are provided so that you can serve three beers at once. The towers come complete with stainless steel faucets and shanks so your beer only touches sanitary stainless steel from the keg to your glass. The 5 foot Clear Beer Lines end in a Nozzle & Hex Nut Assemblies that connects to all standard keg couplers. The towers are mounted using the gasket and screws that are included.
Keg Storage Capacities:
Three (3) Full Size / 1/2-Barrel (15.5 Gal.)
Three (3) Pony Size / 1/4-Barrel Short (7.75 Gal.)
Five (5) 1/4-Barrel Slim (7.75 Gal.) or
Nine (9) 1/6-Barrel (5.23 Gal.)
Digital Temperature Display
Continuous Cold Air Channeled Through Tower to Ensure Cold Product
Heavy-Duty Stainless Steel Exterior and Top
Two Built-In Drip Trays with External Drains
Stainless Steel Interior Walls and Ceiling
Rubber Floor Mat Reduces Shock on Cabinet Interior
Magnetic Gaskets Provide Positive Door Sealing
Self-Closing Doors with Locks
Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
CFC-Free Foamed-in-Placed Polyurethane Insulation
Designed for Built-in or Freestanding Use
Refrigeration System Accessible from the Front
Two Knockouts for Remote CO2 or Nitrogen Tank
25% More Energy Efficient Design Saves You Money Each Month!
ETL Listed for Commercial Use
Some configurations require external tank mount.
Compressor (Parts Only)
(3) KT85D-L American D System Couplers
741 Single Gauge Regulator with 3-way Air Distributor
5 lb Aluminum
Keg Storage Capacities
Full Size / 1/2-Barrel
Pony Size / 1/4-Barrel
Draft Beer Tower
Number of Faucets
Color / Material
Number of Doors
Accepts Custom Overlay Panel
Dispense Kit Assembly Manual
Temperature Controller Manual
Material Safety Data Sheet
You may need to download Adobe Acrobat Reader to view and print PDF's. Click the link below to download Adobe Acrobat Reader for free. Download Adobe Reader
Inventory Reduction - 60" Three Keg Commercial Grade Kegerator with Complete Direct Draw Kit Reviews