MicroMatic Complete 50 Liter Pressurized Keg Beer Kegerator Cleaning Bottle & Tube Kit

This pressurized cleaning kit is an economical and easy-to-use keg cleaning solution. To clean out your beer lines, simply tap the 50 liter bottle filled with cleaning solution as if it was a normal keg. This complete kit includes a 50L pressurized cleaning bottle and tube, a bottle cap, a 32 oz. bottle of beer line cleaner, a nylon cleaning brush, and a standard duty faucet wrench (not shown).

1. Fill the cleaning bottle with line cleaner solution. Secure the bottle cap onto the mouth. Detach the keg coupler from your keg and attach it to the cleaning bottle cap.
   
   
2. Place a bucket or drain underneath your faucet to catch the cleaning fluid. Your draft beer system is now ready to be cleaned.
   
   
3. Pull forward on your faucet handle to begin. Your CO2 canister forces the cleaning solution through the keg coupler, through the beer lines, out of your faucet, and into the waiting waste receptacle.
   
   
4. Repeat the above with clean water to rinse the lines, and you now have a clean, fresh-tasting draft beer system again.

We recommend that you clean your draft beer system with beer line cleaner at least every month or every other keg. Every four or five normal cleanings, we suggest you use an acid line cleaner to remove mineral deposits and prolong the life and quality of your draft beer system.

Important information regarding Prop. 65 for CA residents.