Kegco D System Keg Tap - Black Lever Handle

Model: KT85D-L
3 Reviews
$49.32SAVE 25%
$36.99

90 Day Money Back Guarantee
Select Model:
IN STOCK (usually ships within 24 hours)
  • Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants
  • Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers
  • NSF approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe
  • This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs
  • Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg
DESCRIPTION
INFO & GUIDES
REVIEWS
Q&A
NSF Approved

This is a commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American "D" system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a stainless steel probe. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg.

Coupler Diagram

  • System: D
  • Black Lever Handle
  • Nickel-plated Forged Brass Body
  • Stainless Steel Probe
  • NSF approved
Warning WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

02/20/2015

Does the job
2 Dogs Pub

We've got a few of these couplers in our bar and have been happy with them. The handle mechanism works well and overall the coupler feels solidly built. We bought our first one to replace an old lever handle coupler that broke and it worked so well that we bought a bunch more (our old couplers were really hard to move the handles in and out to disengage them).

02/20/2015

Solid build
Big Z

I had a wing handle coupler that came with a kegerator I was given and the plastic part broke, so I called to buy a new one. The salesperson explained that it was not uncommon for the plastic wing handles to break and recommended the lever handle, so i bought it. I've had it for over a year and haven't had any issues with it so I'm back to buy one for a friend.

07/17/2008

Couplers
Keg King

Great coupler I replaced my wing-handle with this design. Much east to use and seems to very durable.

Question:
What's the purpose of the check valve? I found a small white ball lose in the box, approx. 1/4" in diameter, I did not install it but see it now on the drawings. Does it matter?
by greg on October 20, 2018
Answer:
The check valve is intended to keep beer from flowing back in to the keg if you run out of Co2.
by Krystina on October 22, 2018
Staff Answer
Question:
where the beer line attaches to the keg coupler. is there a washer needed?
by steve on November 27, 2018
Answer:
Yes, You need a neoprene washer at the connection between the coupler and the beer lines coupler nut. Part number is KC NEOW
by Dave on November 28, 2018
Staff Answer
Question:
So, I have 10 lbs of pressure in the keg, but the relief valve is opening. Is there a fix to this?
by Dave on September 14, 2019
Answer:
See if there is any residual beer that gumming up the pressure relief valve the spring, Try wiggling it around. You Mmay need to disconnect the keg couple and wash it thoroughly. Keg couplers rarely have faulty blow off pressure relief valves if the pressure is truly at 10psi.
by Dave on September 14, 2019
Staff Answer
Question:
Can this coupler be used with nitrogen
by Joel on September 29, 2019
Answer:
Yes this coupler is compatible with Nitrogen.

Feel free to reach out to me directly to place an order. I may be able to offer unseen discounts and at the very least offer a personal service to you.
Ben 858-218-2339
by Ben on October 01, 2019
Staff Answer
Question:
D System Keg Tap - Black Lever Handle Model:KT85D-L Will this work on a 1/6 barrels?
by Gar on October 30, 2019
Answer:
Yes, as long as the are commercial, domestic kegs.
Feel free to contact me directly to answer any additional questions or to place an order for expedited delivery.
Ben Reaney 858-218-2339
by Ben on November 04, 2019
Staff Answer
Showing Questions 1-5 of 7
 1 2  

Select Options & Upgrades

Add Hose Nipple Attachment
Kegco D System Keg Tap - Black Lever Handle $49.32 SAVE 25% $36.99
D System Keg Tap - Black Lever Handle
OPTIONS SUMMARY
ADD HOSE NIPPLE ATTACHMENT
Base Price
$36.99
Options
Total

CONNECT WITH US!

@BeverageFactory
Added to Cart

.....