Kegco Set of 6 - Beer Keg Taps Couplers S System Ergonomic Lever Handle Stainless Steel Probe

The Kegco KTS98S-W Commercial Grade S System Keg Coupler is compatible with many European breweries such as Heineken, Beck's, Amstel Light and Pilsner Urquell. It has a stainless steel body and probe that are resistant to chemicals and won't chip like chrome. It has a longer, narrower probe than the D system. This keg tap has a clickable lever handle that easily clicks up and down to engage the keg, making it more convenient than the conventional lever style keg couplers that need to be pulled out before being pushed down. It also features a 55-psi pressure release valve to prevent over pressurizing the keg.

• Ergonomic Handle:
  The KTS98S-W has an easy to use ergonomic handle. Simply press the lever down to tap a keg and pull it up to untap it. A mechanism inside the coupler handle automatically locks it into position so you don't have to pull the handle out before moving it up or down. Anyone who has pulled the handle off of a keg coupler can appreciate the convenience!
  
  
  
• Stainless Steel Probe:
  The keg probe, which is the part that actually presses down into the keg to allow beer to pass through the coupler, is made of high quality stainless steel. It is resistant to chemicals, making it more sanitary than chrome plated brass.
  
  
  
  
• Stainless Steel Body:
  This premium keg tap is constructed of durable 304 grade stainless steel so it can stand up to the toughest conditions of a commercial bar. The body also features a 55-psi pressure release valve, allowing you to easily let the pressure out of the keg.
  
  
  
  

WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• System: S
• Ergonomic Lever Handle
• 304 Grade Stainless Steel Body
• 304 Grade Stainless Steel Probe
• 3/8" O.D. Barb Gas Port (To fit 5/16" I.D. Gas Hose)
• 7/8"-14 Thread Beer Port (U.S. Beer Industry Standard)
• Compatible with many European breweries such as Heineken, Beck's, Amstel Light, Stella Artois and Newcastle
• NSF approved

1. Check Ball Retainer
2. Check Ball
3. Keg Probe
4. Safety Valve Assembly
5. Safety Valve Housing
6. Body
7. Check Valve
8. Hose Nipple
9. Hex Nut
10. O-Rings
11. Body Washer
12. Probe Seal
13. Handle
14. Handle Pin