MicroMatic 24" Stainless Steel Surface Mount Drip Tray with Glass Rinser

The MicroMatic DP-MET-T-24GR-Z 24" Surface Mount Beer Drip Tray with Glass Rinser is a durable and convenient essential to your commercial bar setup. With its easy-to-install and easy-to-mount design, you can thoroughly rinse your glassware instantly and ensure a flawless pouring experience.

FEATURES:

• Tray wraps around tower pedestal for a nice, clean finish
• Easy installation: drill holes for rinser and drain
• Robust 18-gauge stainless steel construction
• Welded corners, finished smooth for safety and appearance
• Fast-draining, precision perforated screen
• Center-mounted solid brass drain

Condition the glass the moment before dispensing the beer:

• Rinse away any impurities that might be in the glass
• Chill the glass utilizing cold water
• A wetted glass pours better

Rinser Water Inlet Installation:

• Always check local plumbing codes first.
• Install an in-line water regulator set at 15 PSI from the street water supply.
• Install a shutoff rinser on the water supply.

NOTE: It is recommended that a licensed plumber connect the glass rinser to the water supply line. Always use an in-line shut-off and water pressure regulator. Micro Matic shall not be held liable for damage caused by improper installation.

WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• Fits: Metropolis Towers
• Glass Rinser: Yes
• Length: 24"
• Faucets: 4-8
• Series Type: Surface Mount
• Height: 3/4"
• Finish: 304 Brushed Stainless Steel
• Width: 8-1/2"
• Drain: Threaded Brass 3-1/2" x 5/8" x 18
• Drain Hose Connection: 1/2" Flat Barb
• Water Connection: External-1/2" BSP (standard plumbing connection)