Kegco 11 Ft. 5/16 Inch I.D. Vinyl Gas Line Assembly with 2 Snap Clamps
Model: ALA516-11
4 Reviews
$17.11SAVE 30% - $5.13
$11.98
IN STOCK (usually ships within 24 hours)
- 11 feet of 5/16" I.D. (9/16" O.D.) Air/Co2 tubing, color may vary
- Made of Themoplastic Vinyl Hose (Super Vinyl)
- Tubing will not rot, swell, or dry out
- Unaffected by normal cleaning compounds
- Comes with two plastic snap clamsp with a reusable clamp design
DESCRIPTION
INFO & GUIDES
REVIEWS
Q&A
11 feet of 5/16" I.D. (9/16" O.D.) Air/Co2 Tubing made of Thermoplastic Vinyl Hose (Super Vinyl). Color may vary. This tubing will not rot, swell or dry out and is unaffected by normal cleaning compounds. This air line assembly comes with two Plastic Snap Clamps with a reusable clamp design. Reusable plastic clamps make it easier to switch out taps or for cleaning. Additional custom lengths are available.
03/29/2017
long gas line smokewrenchThis works well for my set up
08/21/2015
great chuckvery easy to install
03/02/2015
I would buy this item again. MikeGreat air line for my Keezer.
Question:
I recently ordered a Kegco dual tap kegerator, the air lines from the co2 valves were clear, Just like the beer lines. Is this going to cause a problem? Not sure if they are correct.
by Irishbeer on February 05, 2024
Answer:
This will not cause any issues with the CO2. We sometimes substitute clear lines for customers.
by Modesto on February 06, 2024
Staff Answer
Single Faucet Kegerator Beer Dispensers
Dual Faucet Two Tap Kegerators
Triple Faucet Three Tap Kegerators
Undercounter Built-In Kegerators
Outdoor Kegerator Beer Dispensers
Commercial Kegerators
Mini Kegerators
Cold Brew & Nitro Coffee Dispenser Kegerators
Home Brew Kegerators
Carbonated Water Kegerators
15" Kegerators
Kombucha Equipment
Guinness® Dispensing Kegerators
Wine Kegerators
Kegerator Cabinets
Kegerator Covers and Accessories
Kegerators
Kegerator Conversion Kits
Kegs & Keg Accessories
Beer Faucets
Beer Shanks
Draft Beer Towers
Keg Taps Couplers
Regulators & Gas Equipment
Beer & Gas Line Hose
Co2 and Nitrogen Air Tanks
Beer Line Cleaning Equipment
Drip Trays
System Fittings
Jockey Boxes
Keg Beer Party Pumps
Guinness® Dispensing Equipment
Remote Glycol Systems
Wine Cooler Refrigerators
Wine Cellar Cabinets
Wine Racks
Cooling Units
Wine Dispensing Systems
Wine Accessories
Wine Making
Nitro Hot Draft System
Ready to Drink Bag-in-a-Box Coffee Dispensing Equipment
Nitrogen Infusers
Nitrogen Tanks & Generators
Nitrogen Beer Regulators
Nitro Cold Brew Coffee Kegs
Cold Brewed Coffee Tools
Cleaning Equipment
Outdoor Appliances
ADA Appliances
Commercial Grade Appliances
Beverage Centers
Refrigerators
Drawer Refrigerators
Ice Makers
Water Dispensers & Accessories
Freezers
Home Brew Equipment Kits
Fermentation Equipment
Boiling and Mashing Equipment
Home Brew Beer Kegs
Home Brew Kegerator Conversion Kits
Brewing Tools
Home Brew Ingredients
Cleaning Chemicals
Test Equipment
Home Brew Beer Bottles and Bottling Equipment
Brewery Fittings
Draft Beer Equipment
Homebrewing Equipment
Wine Equipment
Luxury Appliances and Refrigeration
Coffee Equipment
Kombucha
The Beverage Blog
Frequently Asked Beer Questions
Shop by Brand
Shop by Category
05/15/2019
Get the right size.
Mike GThis tubing works good. It doesn't get very stiff when it sits in the kegerator at 36 deg. It was cheaper for me to buy two of these 5 ft. with snap clamps then to buy 10 ft. of just tubing and cut it since I needed 2 at 5 ft. I don't recommend using the snap clamps. They are unreliable. I was force carbonating a keg with the air line going into the out tube on the keg, and one of these clamps came off. I lost the entire tank of co2 and half the beer from the keg. What a mess. I will never use this plastic clamp again. But, the hose is good.