Enjoy ice-cold beer on tap without taking up a ton of space in your home with the new Kegco VSK15-SSLNNK Kegerator! This durably built beer dispenser is designed with a slim 15" width which allows it to be built in undercounter in a very thin footprint - the perfect option to replace that old trash compactor you're not using anymore! Not only will it look great, thanks to it's attractive brushed stainless steel door with lock, but it's powerful compressor will do a great job maintaining the proper temperature for your beer and fan-forced cooling will push cold air up into the beer tower to keep every drop cold.
A cool blue LED lighting panel illuminates the contents of the kegerator, making it easy to adjust your CO2 pressure or configure your keg coupler. The low-heat lights do little to affect the temperature inside the beer referigerator.
Easily set and monitor your internal temperature at the push of a button! The intuitive control panel allows you to turn the light on and off, change the temperature from Fahrenheit to Celsius and adjust the temeprature in 1 degree increments.
Fits Quarter Slim Keg
Even with it's slim, space-saving design, this keg cooler can house up to a 7.75 gallon quarter slim keg. It also works equally well with 5 gallon Sankey kegs or 5 gallon ball lock home brew kegs, so you'll be sure to find a beer you enjoy!
Customizable Dispense Kit
This unit comes with a single tap draft dispense system with 100% stainless contact components, and optional upgrades are available to help you build a draft beer dispense kit to your exact specifications.
Wide Temperature Range
The Kegco VSK-15SSLN boasts the widest temperature range available on the market. Dispense your beer at an ice-cold 32°F or turn the temperature up high enough to use the cabinet as a fermentation chamber. With an adjustable range of 32-75°F, you're sure to find the setting that suits your tastes.
Includes a brand new 5 lb. Aluminum CO2 Tank This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Commercial Grade Dual Gauge CO2 Regulator The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps This standard length 5 foot 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design.
Includes D system lever handle keg coupler that can tap all domestic kegs This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle.
Includes a 3" Diameter Polished Stainless Steel Draft Tower This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. This tower is mounted using the gasket and four screws that are included.
Matte black cabinet with stainless steel door
Digital temperature control keeps temperature in range of 32°F-75°F (cold enough to dispense and warm enough to ferment)
Maximum Ambient Temperature: 90 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Fan-forced cooling provides even temperatures throughout the cabinet and helps with quick temperature pulldown on a warm keg
Blower hose direct cold air into the draft beer tower so every drop is kept cool
Tower extension is provided to bridge the gap between the top of the kegerator and the bottom of the countertop in undercounter applications
LED interior lighting
Includes both Towel Bar and Curved door handles so you can choose the version that best matches your decor
Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
A perfect option for dispensing beer, soda, kombucha or wine
25% more energy efficient design saves you money each month!
Plugs into standard home outlet
This kegerator can fit one quarter slim keg, one 5 gallon commercial keg or one 5 gallon home brew keg.
23 3/4" (25 1/4" w/ handle)
Compressor (Parts Only)
Keg Storage Capacities
Full Size / 1/2-Barrel
Pony Size / 1/4-Barrel
5 gal. Ball/Pin Lock Keg
Draft Beer Tower
Number of Faucets
Color / Material
Number of Doors
Towel Bar or Curved
Accepts Custom Overlay Panel
115 V / 60Hz
Material Safety Data Sheet
You may need to download Adobe Acrobat Reader to view and print PDF's. Click the link below to download Adobe Acrobat Reader for free. Download Adobe Reader
15" Wide Single Tap Stainless Steel Built-In Left Hinge Kegerator Reviews
Average Customer Rating:
(based on 1 reviews)
Good so far
Bert (02-20-2019) Fort Mill, SC
This was shipped to me in South Carolina. It arrived in good form and well packed
When I first set this up I have challenges fitting the CO2 container with the gauges and tubing to fit with the keg and tap. The pipe that goes up the tap came off and I had to pull everything out to reattach
Once it was set up, it has worked great. The fridge is a bit loud when it is on