Kegco

24" Wide Triple Tap Black Kegerator

Model:K209B-3NK
Regular Price: $799.99
You Save $160.00
+ $50 INSTANT SAVINGS
$589.99

This high-quality Kegco K209B-3NK Three Tap Keg Beer Dispenser stores your kegs in a sleek all-black cabinet with a triple faucet draft beer tower. It has a large interior that can easily accommodate one full size, pony, or quarter slim keg, two 5 gallon commercial kegs along with one 5 gallon home-brew keg, or up to three 5 gallon home-brew kegs, and the stainless steel interior floor mat provides extra durability by displacing the weight of your kegs evenly over the floor of the cabinet. When you aren't using this keg refrigerator to dispense beer, the two included adjustable wire shelves allow you to convert the unit into a regular all-refrigerator or beverage center to provide additional refrigerated storage space.

Its quiet and energy-efficient design makes this Kegco K209B-3NK Triple Tap Beer Dispenser perfect for use in the home. Easy-roll casters allow you to move this kegerator from room to room wherever and whenever you need it, and the casters lock to prevent the unit from rolling again once you have it where you want it. The recessed drip tray has a plastic grill that can be taken out and cleaned in the dishwasher, making the mess of sticky beer a thing of the past. An attractive and easy-to-install chrome safety rail also helps to keep mess to a minimum by preventing your mugs and glasses from sliding off and breaking.

Warning WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
PDFInstruction Manual
PDFDispense kit Assembly Manual
PDFParts Diagram
PDFEnergy Guide
PDFDownload Custom Art Template
PDFMaterial Safety Data Sheet

24" Wide Triple Tap Black Kegerator Reviews

Average Customer Rating:
(5)
(based on 84 reviews) 
ICE Cold Beer
by:DrunknSailor (04-18-2019)
Hudson, FL
Comments:Bought this for our new house, it is nice having draft beer for whenever I want one. The beer is ice cold and smooth. Only thing is the CO2 wasn't full, but that could be from me not reading a disclaimer. Found a liqour store that could fill it for 10 dollars. Not bad at all.
Bottom Line:I would recommend this product.
 
Great Unit
by:Bob (09-25-2018)
NM
Comments:So much easier than bottling.
Beverage Factory did a great job with the order and delivery.
Kegco is an outstanding oem going above and beyond.
Bottom Line:I would recommend this product.
 
Simple and easy
by:Scotty (03-13-2018)
Phillipsburg N.J.
Comments:Assemble very easy runs quiet
For me I wish I could just get it a little colder I can get it down to 37 degrees
Bottom Line:I would recommend this product.
 
Great Purchase
by:Zach (07-25-2017)
Boston, MA
Comments:I love this kegerator, and I now own two of them. It's a great product, easy to dissemble to keep clean. Just wish shipping was cheaper!
Bottom Line:I would recommend this product.
 
Better than expected!
by:Jon (06-22-2017)
paoli, pa
Comments:Our old Kegerator broke so we wanted to upgrade to a double tap. Found this bad boy online and arrived well packed, had clear installation instruction, and went together easily. Highly recommend if your are in the market.
Bottom Line:I would recommend this product.
 
Loading.....
Question:
Are the three handle pulls screw on so I could switch them out for a branded handle if wanted?
by Beer Guy on November 13, 2018
Answer:
Hello Beer Guy,

Yes you can attach a branded handle so no worries on that end. Hope this help and thank you for your question.

Thank you,
by Hector on November 14, 2018
Staff Answer
Question:
Can the kegco Model:K209B-1 be safely put under a counter?? It looks like it is the same size as the "built-in" models on this site, if not just touch smaller. Didn't look like there was any real difference in specs/size btw the built in models and this model?
by B on December 29, 2018
Answer:
This model is meant to be used in a freestanding application. It will require a minimum of 3" of air space on the rear and each side to allow for proper air circulation around the compressor.
by Nick on January 02, 2019
Staff Answer
Question:
Can I fit 5 corny’s Plus a 5lb CO2 tank inside?
by BJ on February 27, 2019
Answer:
No, the most you can fit is 3 cornys and a tank
by Dave on March 13, 2019
Staff Answer
Question:
Can one of the faucets be swapped out for a stout?
by Nitrobro on March 02, 2019
Answer:
Yes, the connection points are all universal so you can have them switched if you call in and do an order with anyone in our sales department.
by Dave on March 06, 2019
Staff Answer
Question:
Will this unit hold Miller/Coors kegs?
by TLS on June 02, 2019
Answer:
yes this unit will fit a coors miller keg.
by Dave on June 04, 2019
Staff Answer
 1 2   Showing Answers 1-5 of 10

 

Select Options

This product has multiple options. Please select options and then add to cart at the bottom of the page.

Item Qty Discount Price
Model: BF K209B-3NK
Availability: In Stock
20% + $50$589.99
Select Upgrade Options
SELECT TOWER
Chrome Plated Metal Three Faucet Tower (Included) +$0.00
Three Faucet Stainless Steel Tower +$5.00
Remove Tower From Order (No Thanks, I Already Have One) -$60.00

SELECT FAUCET TYPE
Three Chrome Faucets / Brass Levers (included) +$0.00
Three Stainless Steel Faucets with 100% Stainless Steel Beer Contact +$47.00
Three Perlick 630SS Faucets +$117.00
Three Perlick 650SS Flow Control Faucets +$168.47
Remove Faucets From Order (No Thanks, I Already Have Them) -$43.95

SELECT FIRST KEG COUPLER
No Keg Coupler Selected +$0.00
Stainless Steel D System Keg Coupler Lever Handle +$26.21
Stainless Steel S System Keg Tap Coupler (Import Kegs) +$34.31
Stainless Steel D System Keg Coupler with Ergonomic Handle +$48.34
Low Profile D System Keg Tap Coupler +$67.85

SELECT SECOND KEG COUPLER
No Keg Coupler Selected +$0.00
Stainless Steel D System Keg Coupler Lever Handle +$26.21
Stainless Steel S System Keg Coupler (Import Kegs) +$34.31
Stainless Steel D System Keg Coupler with Ergonomic Handle +$48.34
Low Profile D System Keg Tap Coupler +$67.85

SELECT THIRD KEG COUPLER
No Keg Coupler Selected +$0.00
Stainless Steel D System Keg Coupler Lever Handle +$26.21
Stainless Steel S System Keg Coupler (Import Kegs) +$34.31
Stainless Steel D System Keg Coupler with Ergonomic Handle +$48.34
Low Profile D System Keg Tap Coupler +$67.85

SELECT CO2 TANK
No CO2 Tank Selected +$0.00
5 lb. Co2 Tank +$64.95
5lb CO2 Tank with Electric Red Corrosion Resistant Epoxy Finish +$66.99
10 lb. Co2 Tank (May have to Place Outside Unit) +$94.99

OPTIONAL CLEANING KIT (Important To Clean Lines after each Keg)
No Cleaning Kit Added +$0.00
Add 1 Quart Hand Pump Cleaning Kit w/ 2 oz. Cleaner +$29.27
Deluxe Hand Pump Pressurized Cleaning Kit with 32 oz. Cleaner +$54.49
Draftec Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner +$55.51
Add Complete D System Pressurized Cleaning Kit +$158.22

SELECT 3 PRODUCT CO2 OPTION
No CO2 Option Selected +$0.00
Single Gauge Regulator with 3 Way Air Distributor +$53.00
Double Gauge Regulator with 3 Way Air Distributor +$58.00

Add Residential Kegerator Cover
None Selected +$0.00
Add Residential Kegerator Cover to protect it from the elements +$55.99

CUSTOMIZE - Save 20% for a limited time only!
None Selected +$0.00
Add Customize Door Decal (2' x 2') +$40.00
Add Customize Door Wrap +$96.00
Add Customize Full Wrap +$160.00