Economy Party Keg Dispenser Party Tap Kit
Model:E1PK
Highlights
- Kegco 541 Pro Series singe gauge regulator has a large hand adjustment knob to easily set output pressure
- D system plastic wing handle keg coupler taps all domestic "D" system sankey kegs
- No shanks or towers to be installed - all you need is a refrigerator large enough to hold a full size keg
- Fast and easy way to have a kegerator in your home without drilling through your refrigerator
- Note: CO2 tank is optional add on and shown for reference purposes
This Kegco Economy Party Kegerator Kit is the perfect solution for beer lovers that want the convenience of a "no assembly required" party pump with all the superior performance features of a kegerator! There are no shanks or towers to install... all you need is a refrigerator large enough to hold a full size keg, and you can quickly and easily have fresh tasting cold draft beer on tap for any party or get together. Thanks to the CO2 driven dispense system, your beer will not go flat if you cannot drink it all in one night, so you can enjoy any left over beer long after your guests have gone home. Kegco's kits use only high quality commercial grade parts that have been designed and built to last, so you can trust that your party is in safe hands!
Pro Series Single Gauge Regulator:
This pro series regulator features an easy to read Co2 gauge that allows to to quickly see what your output pressure is set at and a large hand control that allows you to effortlessly adjust the pressure inside your keg. The chrome plated brass regulator has a manual pressure release valve as well as an integral tamper-proof safety pressure relief valve that releases at 45-psi.
D System Wing Handle Keg Coupler:
This plastic wing handle keg coupler (keg tap) is compatible with all domestic brand kegs. This coupler works with all domestic "D" system sankey kegs. This keg tap features a 55-psi pressure relief valve and a nickel-plated forged brass body.
Party Faucet Assembly:
This is a black plastic party pump squeeze faucet with two feet of black 3/16" I.D. beer line. This is the faucet you see installed on all picnic keg pumps. This faucet comes with a hex nut assembly that will attach to the top of all standard commercial keg couplers for easy assembly.
Note: CO2 tank is optional add on and shown for reference purposes
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.ECONOMY PARTY KEGERATOR CONVERSION KIT COMPONENTS
- (Optional) Aluminum 5 lb Co2 Tank
We offer the Co2 Tank as an optional kit component because many people already have one or would like a large tank size. All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. If you do not already have a tank, we highly recommend you take advantage of our incredible low price on brand new Co2 tanks. - LH-541 - PRO SERIES SINGLE GAUGE REGULATOR
This pro series single regulator features a Co2 gauge and a large hand control for easy monitoring and adjustment of Co2 pressure inside your keg. The chrome plated brass regulator has a manual pressure release valve as well as an integral tamper-proof safety pressure relief valve that releases at 45-psi.. - 516BAL-5 - 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINE
Our brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16" I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out. - 516SNP - PLASTIC REUSABLE CLAMP FOR 5/16" ID TUBING
This easy-to-use white plastic snap clamp fits 5/16" I.D. (9/16" O.D.) vinyl hose. A tooth-locking mechanism allows you to tighten the clamp without using tools, and the semi-rigid plastic design is reusable and will not corrode over time. - FT86P - D SYSTEM KEG TAP - PLASTIC WING HANDLE
This coupler works with all domestic "D" system sankey kegs. It has a plastic wing handle that twists to engage the keg. The coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a chrome plated keg probe. - PICNIC FAUCET WITH ATTACHED 2' BLACK BEER LINE
This is a black plastic party pump squeeze faucet with two feet of black 3/16" I.D. beer line. This is the faucet you see installed on all picnic keg pumps. This faucet comes with a hex nut assembly that will attach to the top of all standard commercial keg couplers for easy assembly.
SPECIAL INSTRUCTIONS:
- Some gas suppliers will not fill a CO2 tank, they will only exchange your CO2 tank for a full one. It is a good idea to find out what options are available in your area so that you don't buy one of our brand new high quality aluminum CO2 tanks, only to have it swapped out for a rusty old steel tank. If you are unsure where to get a tank filled in your area, you can try asking a local beer distributor or doing a local search for fire extinguishers and fire safety equipment. Companies that refill fire extinguishers are generally willing to fill a CO2 cylinder.
- All additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-800-710-9939.
Economy Party Keg Dispenser Party Tap Kit Reviews
| Average Customer Rating: | (4) |
| (based on 2 reviews) |
| works for me beautifully | |
| by: | Vanrijden (08-05-2013) Denver |
| Comments: | Great product, almost one year now and zero problems. Just called to add another tap and the guy was super helpful and its cheap. Wish the hose was longer for the actual tap dispenser but its really not a big deal. Having one keg on tap spoiled us so now we are adding another so we can have a special weekend/party strong beer and a easy drinking lighter one on tap at all times. |
| Bottom Line: | I would recommend this product. |
| Good but the beer line is too short. | |
| by: | Ryan (03-19-2012) Blacksburg, VA |
| Comments: | This kegerator would be great for the money but the beer hose is too short. When dialed to the right pressure the beer will shoot out the end way too fast. The only way to counter this is by having the appropriate hose length, which is roughly 5 feet for this type of hose. Also when I ordered mine it came with absolutely no instructions, even though it claims to. Other than that though it seems to be good quality for the price. |
| Bottom Line: | I would recommend this product. |
Be the first to ask a question.