Kegco Premium Dual Gauge, 2-Stage CO2 Draft Beer Regulator

Kegco is proud to present the new HL-62 Premium Double Gauge CO₂ Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants. This brewery-grade regulator features a multi-stage body for more precise control when making small adjustments to the output pressure. The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg, allowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you're dispensing. A large adjustment knob allows you to make quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.

This dual gauge draft beer regulator has a gauge on top that measures CO₂ pressure in the keg as well as a gauge on the side that indicates how much CO₂ is left in the gas cylinder, so you'll never be caught off guard by an empty CO₂ tank again. Both gauges come equipped with rubber boots that help protect them from damage in the event of a fall.

For added safety, this regulator also features an internal safety pressure relief valve that releases when the delivery pressure gets too high, a manual pressure release valve built into the regulator body, and a shut-off valve that makes it easy to instantly shut off pressure to the keg without backing up your beer line. This shut-off valve has a check valve that prevents backflow into the regulator.

• Aluminum adjustment knob is more precise and easier to turn than similar models
• Commercial grade design withstands the demands of the busiest bars and restaurants
• Rubber boot on gauges helps to prevent damage in the event of a fall
• Shut-off valve has a check valve to prevent backflow into the regulator
• Inlet nipple has a sintered metal flow control filter to keep dirt and other particles from harming the internal regulator parts
• Hose barb end has been designed for use with 5/16" I.D. pressure tubing
• Regulators are all pressure tested to assure reliability in the field
• CGA320 Input
• 5/16" barbed output for use with 5/16" ID hose

WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.