Taprite Primary High Pressure Double Gauge Mixed Gas Regulator
$132.00SAVE 30% - $39.60
IN STOCK (usually ships within 24 hours)
High pressure regulator can be used on any CO2 tank with a CGA-320 valve
Features dual gauges to measure PSI was well as CO2 volume in the cylinder
Red plastic knob on front is used to easily adjust the output pressure
Regulator allows for an adjusted pressure from 10 to 130 PSI
Can be used as as primary regulator for mixed gas or in a gas blender application
You can use this high pressure regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure psi as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The red plastic knob on the front is used to adjust the output pressure.
This high pressure regulator allows for an adjusted pressure from 10 to 130 psi. This regulator can be used as a primary regulator for mixed gas or in a gas blender application.
WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Mixed Gas Primary Co2 Regulator
Screw Adjusted Pressure
Output Pressure Gauge: 10-130 psi
Tank Pressure Gauge: 0-2000 psi
Performance: 1 Pressure / 1 Product
3/8" O.D. Outlet Barb with Shut-off
commercially CO2 tanks are rated at 3000psig. How can this be used when the primary gauge is 2000psig max
by fredon November 06, 2018
That's a great question! Commercial CO2 tanks are rated for pressures up to 3,000 psi, but CO2 in a tank will have a gas pressure of around 800-900 psi under most normal working conditions (temperatures). The remainder of the compound will be in a liquid state. As CO2 gas leaves the tank, CO2 liquid changes to gas to equalize the pressure in the tank. The tank should never reach the maximum rated pressure...it shouldn't even come close.
by Nickon November 08, 2018
About regulators for Nitrogen delivery systems - is this Taprite product sufficient or should you look for other features? I want to setup a Nitro tap, for coffee or for Stout.
by jcInsaniacon November 14, 2019
Great question; this is a high pressure CO2 regulator, so you would require an adapter to allow it to work with a nitrogen tank. It can certainly handle the pressure required. We sell all of the necessary equipment you would need for the coffee/stout set up. Please call our sales team at 800-710-9939 for a full system quote.