Taprite Standard Double Gauge Nitrogen Regulator

You can use this regulator on any High Pressure Tank with a CGA-580 valve. Nitrogen tanks have a female thread (CGA-580), these regulators have a male thread. Double Gauge Regulators Measure PSI, as well as the Volume of Nitrogen in the Cylinder. They are good for indicating how much Nitrogen is left in the cylinder and when you should have it refilled. The screw in the center is used to adjust the output pressure.

This double gauge nitrogen regulator has a forged brass body and a single metal outlet barb for use with 5/16" ID gas line. This regulator features a non-adjustable safety blow off at 55-65 PSI, a flow control inlet nipple filter and a permanent Quad-Ring inlet seal on the primary gauge.

WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• Primary Nitrogen Regulator
• Nitrogen Tank Mount
• Performance: 1 Pressure / 1 Product
• 3/8" O.D. Outlet Barb with Shut-off
• Tank Pressure Gauge: 0-3000 PSI
• Output Pressure: 0-60 PSI
• Flow Control Inlet Nipple Filter
• Adjust Pressure by Screw