MicroMatic Secondary Co2 Regulator Panel w/Pro-Max

Installation ready! Save time and easily install a secondary regulator and a FOB for your draft beer system with this pre-assembled regulator panel kit. A metal panel makes installation on a walk-in cooler wall easy and features an integrated stainless steel wall bracket that acts as a reliable transition between a keg jumper hose and trunkline connector.

Safely and effectively control the flow of gas to one keg in your draft beer system. Secondary gas regulators reduce pressure from a primary regulator or gas blender, and provide this lower pressure to each individual keg. This secondary regulator has an adjustment range from 0-60 PSI range so you can quickly monitor the amount of gas flowing from the gas source to the keg. The pressure is easily adjusted by turning the set screw with a flathead screwdriver. For added safety, this model has an integrated pressure relief valve that vents the gas flow if outbound pressure exceeds 55 PSI.

Features:

• 1 pressure/1 product
• Single gauge secondary regulator, FOB, beer and gas hoses for kegs, all on one easy to mount panel
• Wall mount panel with pre-drilled holes
• Includes (1) stainless steel Profit Maximizera1/21/2 with pre-plumbed vent drain line
• 8' of 3/8" I.D. clear vinyl with 304 stainless steel tailpiece
• 8' of 5/16" I.D. red vinyl gas hose
• Stainless steel wall bracket
• Secondary regulator regulates gas coming from the primary gas source, going to a single keg
• Pre-taped pipe plug and two hose barbs included
• Forged brass and die cast for durability, accurate machining
• Stainless steel valve seat for high corrosion resistance
• Stainless steel inlet filter
• Constant pressure supply at high output flow rates
• Pressure relief valve ensures safety by releasing at 55-65 PSI

ABOUT PRO-MAX(TM) FOBs: PRO-MAX FOBs reduce pour costs and maximize profits loss when changing kegs. Foam is beer; stop wasting it when a keg empties. PRO-MAXa1/21/2 FOBs sense an empty keg and stop the flow of beer. This allows the beer line to remain full when the keg empties. There is no need to re-fill the beer line: this reduces waste and maximizes glasses per keg. It is manufactured stainless steel with a large beer chamber for easy viewing and stainless steel hose connections.

Important information regarding Prop. 65 for CA residents.

• 1 pressure/1 product
• Single gauge secondary regulator, FOB, beer and gas hoses for kegs, all on one easy to mount panel
• Wall mount panel with pre-drilled holes
• Includes (1) stainless steel Profit Maximizera1/21/2 with pre-plumbed vent drain line
• 8' of 3/8" I.D. clear vinyl with 304 stainless steel tailpiece
• 8' of 5/16" I.D. red vinyl gas hose
• Stainless steel wall bracket
• Secondary regulator regulates gas coming from the primary gas source, going to a single keg
• Pre-taped pipe plug and two hose barbs included
• Forged brass and die cast for durability, accurate machining
• Stainless steel valve seat for high corrosion resistance
• Stainless steel inlet filter
• Constant pressure supply at high output flow rates
• Pressure relief valve ensures safety by releasing at 55-65 PSI