Taprite Four Product Secondary Co2 Regulator

Model: T1694ST
6 Reviews
$344.81SAVE $68.96 (20%)

90 Day Money Back Guarantee
Select Model:
IN STOCK (usually ships within 24 hours)
  • Secondary regulators allow you to regulate the pressure of multiple kegs individually
  • Each regulator has a built-in high volume external safety relief valve to protect dispensing systems
  • Forged brass body provides greater durability and has enough mass to act as a heat sink to prevent freeze up
  • Outlet fittings feature 1600 ball type shut-off and fit 5/16" I.D. pressure hose; high pressure side is right hand thread
  • All regulators are pressure tested for leaks and defects prior to delivery

This Taprite T1694ST Four Product Secondary Co2 Regulator can be used when you are attempting to dispense two or more kegs off of the same Co2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually.

  • High pressure side is right hand thread
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.
  • Body parts are 1/4" NPT (F).
  • Outlet fittings feature Taprite 1600 ball type shut-off. Fits 5/16" I.D. pressure hose. Inlet designed for 5/16" I.D. pressure tubing.
  • All models have heavy duty stainless steel wall mounting brackets.
  • Maximum delivery pressure: 50 PSIG
  • Non-removable adjusting screw limits maximum delivery pressure to 50 PSIG
  • Front loading seat assembly is easily replaceable in the field.
  • All regulators are pressure tested for leaks and defects prior to delivery to assure in-field reliability.
  • Available in multiple pressure and product models.
Warning WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.


Great Regulators

These regulators were a little more expensive than other brands but they feel solid and work great!


Excellent Secondary Regulator

This secondary regulator works great on our 4 tap kegerator. It is built heavy and is easy to use to regulate pressure to each of our 4 kegs. The only catch to this regulator - there is a nipple fitting on each end of the regulator and you must plug the end that is not in use or hooked to your primary regulator. The on/off valves below the regulator work well for switching kegs.


check valves model also thru

There are two choices - the version with check valves has a barb on either end, with no shut off. I put a one foot length of hose that was tied off to keep my gas from escaping. I didn't want a "thru" version, but the check valves seduced me.

Take care to order the right product. I am very irritated.


Product works as described.
E McKishen

Mounted this on the outside of my kegerator. I have 6 kegs to regulate. I use the tank pressure to feed my highest carb level which is a root beer at 30psi. Then I usually have 2 kegs around the same pressure which share a regulator. I might add a fifth regulator so I don't have to share 1. These are very easy to add more onto. I took it out of the box and installed it with no leaks.


quality, best price, prompt delivery

These regulators were the best quality and the least expensive I found online. We received them quicker than expected. Will order from Beverage Factory again in the future.

Showing Reviews 1-6 of 6
 1 2  

Be the first to ask a question.


Added to Cart