Kegco 20 lb. Aluminum Co2 Tank
Model: C20
- Brand new kegs produced from high strength aluminum alloy 6061-T6
- Popular because they are not as heavy as steel tanks and will not rust
- Stamped with required U.S. Department of Transportation and Transport Canada Markings
- 320 valves are CGA approved and have a male thread for CO2 regulators
- Once filled, this tank should be able to dispense 20-25 beer kegs
*All tanks are shipped empty
PLEASE NOTE: This item is on backorder until 12/15/22.
The Beverage Factory offers only brand new aluminum Co2 Tanks. We do not sell reconditioned steel tanks. Every Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. A carrying handle is installed on 10, 15 and 20 lb. cylinders only. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators.
- Easy Carry Handle
- 8" Diameter
- 27.5" Height
- 1800 PSI
- CGA-320 Valve
- Good for 20-25 Kegs
07/08/2013
Great Co2 tank BarleynyeastGreat tank, fast delevery.
05/20/2013
Great deal ThoranSlightly more than a 5 lb cylinder, 4x the capacity. Impressive looks, fresh date
12/27/2010
Get this instead of a 5lb or 10 lb Beerman1957First off, this tank is about 20-30% lighter than steel. Secondly, getting a 20lb tank refilled is only $5.00 more than a 5-lb tank at my local weld shop. Now, for the downside. Your local weld shop may try to EXCHANGE this for a crappy steel tank. All you have to do is tell them you want this EXACT tank back. So, etch your name on it, get a proper receipt and then WAIT for it to be refilled. My refills take about a week. YMMV. This is the baby to get if you have the space.
02/21/2010
Excellent quality BugabooSolid construction(go figure, it's a Catalina cylinder;). Handle has some play but if you slide a -032 o ring under the circle clip, it makes it nice and snug for solid carry. A scuba tank boot makes a nice addition to keep the bottom from getting scuffed up and gives it a more solid base. Make sure you get the 8" boot for this tank, not the more common 7.25" boot.
07/22/2013
Best ValueVery nice tank, and a great value considering the price compared to other vendors and other sized tanks. The handle on it is very nice and is held in place by a large snap ring. This allows the handle to rotate 360 deg to accommodate any regulator. The aluminum is really nice and can easily be polished if a mirror finish is desired.