Kegco

Commercial Kombucharator Kombucha Keg Dispenser - Stainless Steel

Model:KOMC1S-1
Regular Price: $1682.05
You Save $336.41 (20%)
$1,345.64

Equally at home in a trendy restaurant or your very own kitchen, the Kegco KOMC1S-1 Commercial Kombucharator has been specially designed with everything you need to dispense a Cornelius keg of kombucha, a nutritional probiotic tea packed with compounds that support your digestive and immune systems, detoxify, energize, clarify your skin, prevent disease, and elevate your mood. This kombucha dispenser is durable enough to withstand the abuse of retail environments yet small and portable enough to be ultra-convenient in residential use. It has been ETL and ETL Sanitation Listed and is NSF Compliant, meeting the requirements of widely accepted safety standards for kombucha keg dispensers. Whether you're a small business owner that wants to offer delicious kombucha on tap or just a kombucha lover dreaming of enjoying your favorite beverage by the keg, the KOMC1S-1 will be perfect for you!

Card image cap
  1. Blower Hose for Air-Cooled Tower

    Keep the beverage line cooled all the way up to the back of the faucet

  2. Fan-Forced Cooling

    An interior fan provides rapid cool down and ensures consistent temperatures

  3. Internal Thermometer

    Quickly and accurately monitor the internal temperature at a glance

Card image cap
  1. Knockout for external CO2 Tank or Drain Hose

    This knockout allows you to mount your CO2 tank outside the cabinet or direct the drip tray runoff to an external drain

  2. Drip Tray Drain Receptacle

    Any spills from the faucet can be directed into this bottle for quick and easy cleaning

Card image cap
  1. Steel Walls

    Behind these walls lies foamed in place polyurethane insulation to maintain a specific steady temperature

  2. Rubber Floor Mat

    A rubber floor mat reduces the shock of heavy kegs on the stainless steel floor

4" locking casters make this kombucharator easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides superior cooling and cool air is fan-forced into the tower to ensure your kombucha stays cold all the way up to the faucet.

This kombucha dispenser includes a draft tower with a stainless steel faucet and fittings, a set of ball lock keg couplers for Cornelius home brew kegs, a single gauge CO2 regulator, and an aluminum CO2 tank. One 5 lb. tank can pressurize up to fourteen 5-gallon kegs before needing to be refilled. Although everything needed to tap a ball lock Cornelius keg is included, the KOMC1S-1 features many customizable features. The standard faucet is made of durable and sanitary stainless steel, but you have the option to upgrade to a Perlick faucet, which has less internal surface area to prevent a sticky faucet knob. The included ball lock keg couplers are food grade plastic and are designed to prevent corrosion, but you can also upgrade to stainless steel ball lock couplers. View the options below and feel free to call us at 1-800-710-9939 option 1 if you have any questions.

  • Includes a brand new 5 lb. Aluminum CO2 Tank
    This tank is produced from high strength aluminum alloy 6061-T6. This is superior to a steel tank because it will not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 13-14 kombucha kegs depending upon your fill. 5.5" diameter, 18.25" height.
  • Includes Single Gauge CO2 Regulator
    This regulator works with any CO2 tank with a CGA-320 valve. The single gauge measures PSI, indicating how much pressure is inside of the keg. Adjustable output pressure is 0-60 psi. Features 3000 psig Max Primary Inlet, 60 psig Safety Relief Valve R82, female CGA-320 connection, and ball valve outlet with 5/16" OD hose barb connection. Total ports include two primary 1/4" FNPT ports and two secondary 1/4" FNPT ports. This UL listed, compressed gas regulator is for use with air, CO2, and inert gases.
  • Includes 5 feet of 5/16" I.D. Blue Air Line Assembly with 2 Snap Clamps
    Standard 5 fot length of 5/16" I.D. Blue Air/Nitrogen tubing made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two plastic snap clamps with a reusable clamp design.
  • Includes Ball Lock Home Brew Keg Couplers
    This set includes both a gas in and beer out coupler and works with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
  • Includes a 3" diameter Stainless Steel Draft Tower
    The tower is a commercial grade single gauge, single faucet, 3" diameter stainless steel draft tower with 100% stainless steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with a stainless steel faucet and 5 feet of 3/16" I.D. clear tubing. This tower is mounted using the gasket and four screws that are included. The faucet can be upgraded to a Perlick faucet, which has less internal surface area and prevents the faucet knob from sticking.
  • Keg Storage Capacities:
    • One (1) Full Size / 1/2-Barrel (15.5 Gal.)
    • One (1) Pony Size / 1/4-Barrel Short (7.75 Gal.)
    • Two (2) 1/4-Barrel Slim (7.75 Gal.) or
    • Four (4) 1/6-Barrel (5.25 Gal.)
  • Maximum Ambient Temperature: 100 degrees Fahrenheit
  • Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
  • Continuous cold air channeled through tower to ensure cold product
  • Heavy-duty stanless steel top
  • Built-in drip tray with drain
  • Stainless steel interior walls and ceiling
  • Diamond plate floor in cabinet interior
  • Magnetic gasket provides positive door sealing
  • Self-closing door with lock
  • Refrigeration system utilizes ozone friendly R134a refrigerant
  • CFC-free foamed-in-place Polyurethane insulation
  • Knockout for remote CO2 tank
  • Stainless steel finish
  • ETL and ETL Sanitation Listed for Commercial Use

Keg Configurations:

Some configurations require external CO2 tank mount.

UPC: 700697206449
PDFInstruction Manual
PDFDispense Kit Assembly Manual
PDFParts Description
PDFEnergy Guide
PDFTemperature Controller Manual
PDFDownload Custom Art Template

Commercial Kombucharator Kombucha Keg Dispenser - Stainless Steel Reviews

Average Customer Rating:
(0)
(based on 0 reviews) 
No customer reviews available. Be the first to write a review!
 

 

Select Options

This product has multiple options. Please select options and then add to cart at the bottom of the page.

Item Qty Discount Price
Model: BF KOMC1S-1 20%$1345.64
Select Upgrade Options
Select Faucet Option
Polished Stainless Steel Tower with Stainless Steel Standard Faucet +$0.00
Polished Stainless Steel Tower with Stainless Steel Perlick Faucet +$10.00

Optional Keg Coupler Upgrades
Standard Ball Lock Coupler Set +$0.00
MFL Ball Lock Coupler Set +$1.00
Stainless Steel Ball Lock Coupler Set +$43.00
Commercial D System Sankey Coupler (for store bought kegs) +$10.00

SPECIFY CO2 REGULATOR (Kegerator Includes Single Gauge Regulator)
Pro Series Single Gauge Regulator (Included) +$0.00
Upgrade to Pro Series Dual Gauge Regulator +$7.00
Upgrade to Commercial Grade Dual Gauge Regulator +$12.00
Upgrade to Premium 2 Product Dual Gauge Regulator +$19.00
Remove CO2 Regulator from Order (No Thanks Already Have One) -$10.00

SPECIFY CO2 TANK
5 lb. Co2 Tank (Included - Comes Empty) +$0.00
Upgrade to 5lb CO2 Tank with Electric Red Corrosion Resistant Epoxy Finish +$5.00
Upgrade to 10 lb. Co2 Tank (May have to Place Outside Unit) +$17.95
Remove Co2 Tank from Order (No Thanks Already Have One) -$35.00

Optional Cleaning Kit
No Cleaning Kit Added +$0.00
Select 1 Quart Hand Pump Cleaning Kit w/ 2 oz. Cleaner +$19.95
Deluxe Hand Pump Pressurized Cleaning Kit with 32 oz. Cleaner +$34.99
Draftec Deluxe Hand Pump Pressurized Keg Beer Kegerator Cleaning Kit w/ 32 oz. Cleaner +$41.99
Add Complete D System Pressurized Cleaning Kit +$117.99

OPTIONAL TAP HANDLE UPGRADE (Standard Faucet Knob is Included)
Walnut Tap Handle with Black Chalkboard Surface +$38.95
Walnut Tap Handle with Green Chalkboard Surface +$38.95
Walnut Tap Handle with Dry Erase Surface +$39.95
Rustic Barnwood Tap Handle with Black Chalkboard Surface +$39.95

OPTIONAL FAUCET LOCK
Add Optional FAUCET LOCK Add Slide-on Faucet Lock +$41.99
Add Wrap Around Lock for Standard Faucets +$53.99
Add Wrap Around Lock for Perlick 600 Series Faucets +$53.99

OPTIONAL HOMEBREW KEG
Brand New - Kegco 3 Gallon Strap Handle Keg +$89.99
Brand New - Kecgo 5 Gallon Strap Handle Keg +$94.99
Brand New - Kegco 5 Gallon Rubber Top Keg +$101.99
5 Gallon Ball Lock Keg - Reconditioned Beer Keg +$64.50

Bottle Your Brew!
EZ Cap 500ml Flip-Top Home Brew Beer Bottles - Amber (Case of 12) +$24.99
EZ Cap 1 Liter Flip-Top Home Brew Beer Bottles - Amber (Case of 12) +$27.99
Growler Filler Attachment for Standard Beer Faucets +$4.00

CUSTOMIZE
None Selected +$0.00
Add Customize Door Decal (2' x 2') +$50.00
Add Customize Door Wrap +$120.00
Add Customize Full Wrap +$200.00

Optional Extended Warranty
I don't want an extended warranty +$0.00
New Leaf ServicePro 1 Year Extended Warranty +$25.99
New Leaf ServicePro 3 Year Date of Purchase Warranty +$49.99
New Leaf ServicePRO 5 Year Date of Purchase Warranty +$107.99
New Leaf ServicePRO 3 Year Date of Purchase Commercial Warranty +$175.99
New Leaf ServicePRO 5 Year Date of Purchase Commercial Warranty +$371.99