This compact and convenient UACR115-BS01A Ice Maker by U-Line is the perfect ice maker for residential or small commercial use
This ice maker features a black cabinet, a black door, a white interior, and a removable ice storage bin
Ice machine is capable of producing up to 25 lbs. of ice per day and storing up to 25 lbs. of ice at one time
U-Line's ice maker comes equipped with a drainless design, manual defrost, and a mechanical control dial
Unit meets ADA requirements
INFO & GUIDES
This Compact and Convenient UACR115-BS01A Black Cabinet Ice Maker by U-Line is the perfect ice maker for residential or small commercial use. With its streamlined style and ADA compliance this Built-In Ice Maker will fit perfectly under your counter!
This U-Line Compact Ice Maker measures at 27 3/8"H x 14 15/16"W x 20"D and can store up to 25 lbs. of ice on a daily basis. U Line unit can produce ice at the rate of 25 lbs. The ice that it produces is of crescent shape that measures at 1/2"W x 3/4"H x 2-1/2"L. Ice maker uses less than three gallons of water for approximately 25 lbs. of ice and minimal electricity. Unit Features a Mechanical Dial Control that controls the temperature within the unit. The UACR115-BS01A only requires a 1/4" outside diameter water line connection. With no drain required, this Ice maker is very easy, convenient, and inexpensive to install.
This unit does accept a 1/4" Flat or Raised Insert Custom Door Panel
No drain required allows for easy, convenient, and inexpensive installation.
Only requires a 1/4" outside diameter water line connection.
Daily ice rate of up to 25 lbs.
Ice storage capacity: up to 25 lbs. of ice.
Crescent cube size 1/2" W x 3/4" H x 2-1/2" L.
Uses less than three gallons of water for approximately 25 lbs. of ice and minimal electricity.
Meets Americans with Disabilities Act (ADA) height requirements.
Accepts a 1/4" flat or raised insert custom door panel.
Add 1 1/2" to depth for water line connection
ADA Height Compliant
Mechanical Dial Control
MUST add 1/4" to overall width for proper installation
Allow 2-1/2" clearance on hinge side for a 901/2 opening when installed against a wall
Front grille/toe kick must be unobstructed for proper ventilation
DOOR CLEARANCE INFORMATION
*Zero clearance on all 2000 Series black or white units when installed with custom full overlay door panel/frame.
*Zero clearance on all 2000 Series and 1000 Series black or white units when installed with a 1/4" flush insert panel. Allow proper clearance for a raised insert panel.
*Allow 2-1/2" clearance, on hinge side, for a 90 degree opening when installed against a wall on all Stainless Steel models.