The VS15-1WK Built-In Undercounter Side-by-Side Single Zone Wine Cooler and Single Faucet Keg Dispenser is the ultimate beverage center to upgrade your home bar or kitchen. This sleek and sophisticated kegerator and wine refrigerator combination lets you have the best of both worlds. Cold beer on tap and perfectly chilled wine is within arms reach with this beverage center that can hold up to 7 gallons of draft beer and up to 30 bottles of wine. This unit is perfect for daily use and entertaining, providing you with a variety of beverage options. The unit is designed with a French door swing to easily access both the keg and wine bottles simultaneously. Digital temperature display for both sides allows you to easily maintain and control the temperature of your beverages. Manufactured by the industry leaders in the beverage industry, Kegco and Allavino, these units include only premium parts with all stainless steel contact and all parts are serviceable.
A cool blue LED lighting panel illuminates the contents of the kegerator, making it easy to adjust your CO2 pressure or configure your keg coupler. The low-heat lights do little to affect the temperature inside the beer referigerator.
Easily set and monitor your internal temperature at the push of a button! The intuitive control panel allows you to turn the light on and off, change the temperature from Fahrenheit to Celsius and adjust the temeprature in 1 degree increments.
Fits Quarter Slim Keg
Even with it's slim, space-saving design, this keg cooler can house up to a 7.75 gallon quarter slim keg. It also works equally well with 5 gallon Sankey kegs or 5 gallon ball lock home brew kegs, so you'll be sure to find a beer you enjoy!
Single Tap 15" Wide Built In Undercounter Kegerator Keg Dispenser
Includes a brand new 5 lb. Aluminum CO2 Tank This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Commercial Grade Dual Gauge CO2 Regulator The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps This standard length 5 foot 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design.
Includes D system lever handle keg coupler that can tap all domestic kegs This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle.
Includes a 3" Diameter Polished Stainless Steel Draft Tower This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. This tower is mounted using the gasket and four screws that are included.
Digital temperature control keeps temperature in range of 32°F-75°F (cold enough to dispense and warm enough to ferment)
Maximum Ambient Temperature: 90 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Fan-forced cooling provides even temperatures throughout the cabinet and helps with quick temperature pulldown on a warm keg
Blower hose direct cold air into the draft beer tower so every drop is kept cool
Tower extension is provided to bridge the gap between the top of the kegerator and the bottom of the countertop in undercounter applications
Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
25% more energy efficient design saves you money each month!
Plugs into standard home outlet
FlexCount Series 30 Bottle Single Zone Wine Refrigerator
Built-in wine cellar with up to 30 bottle capacity
Roller-glide shelves extend effortlessly minimizing agitation to the wine.
Shelves constructed of durable metal so they will not sag over time.
This wine cellar has 6 shelves that can hold up to 5 bottles each for a maximum bottle capacity of 30 bottles. The maximum capacity is based on the standard Bordeaux size bottle.
Internal fans circulate air for even cooling and faster cooldown
Operating Temperature: 41-64°F
Maximum Ambient Temperature: 90°F
Minimum Ambient Temperature: The lowest temperature you want to store your wine at..The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
The handles are not attached to the unit during shipping and will need to be installed when the unit arrives
23.25" (25" w/ handles)
Compressor (Parts Only)
Cabinet Color / Material
Energy Star Rated
VSWR30-1 Instruction Manual
VSWR30-1 Parts Diagram
VSK-15 Instruction Manual
You may need to download Adobe Acrobat Reader to view and print PDF's. Click the link below to download Adobe Acrobat Reader for free. Download Adobe Reader
30" Side-by-Side Single Zone Wine Refrigerator and Single Tap Kegerator Reviews