CellarPro Wine Cellar Cooling Unit (300 Cu.Ft. Capacity)

CellarPro's 1800XT-220V Wine Cooling Unit provides Outstanding Performance, Adjustable Humidity Control, Super-Quiet Operation and Extra Cooling Power for use in 220V Environments. The CellarPro 1800XT has an 300 Cubic Foot Capacity and is perfect for Small Wine Cellars and Wine Cabinets located in 220V Environments. CellarPro Cooling Units should be installed through-a-wall and cannot be Ducted unless accompanied by an In-Line Fan.

Please Note: The CellarPro 1800XT-220V Can be used in 208-230V and 50-60Hz environments.

OPTIONS AND MODIFICATIONS

• Cord Out Side
  The 8-foot, 16-gauge Grounded Power Cord can be routed to exit from the left side of the Cooling Unit, just below the Power Outlet. This modification is designed for cooling unit installations where the power outlet is located inside the cellar.
  
  
• Condensate Fitting & Tube
  A Condensate Fitting is recommended when the Cooling Unit will be installed in a Wine Cellar. The fitting allows excess condensation to drain from the Cooling Unit through the Vinyl Tube. The included tubing measures 8' long with a 1/2" I.D. The drainage can exit outside the wine cellar with the rear configuration or inside the wine cellar with the bottom configuration.
  
  
• Vent Exhaust Configuration
  CellarPro offers the choice of Top or Rear Vent Exhaust configuration for your Wine Cooling Unit. The Vent Panel can also be swapped in the field for interchangeable Top/Rear Vent Exhaust.
  
  
• Duct Kit (Rear) with Inline Fan Duct Kit
  Allows CellarPro 1800 Series Cooling Units to be ducted up to 100 equivalent feet. The Kit includes: a 6-inch inline fan, 50 ft. of 6-inch insulated ducting, Galvanized Metal Duct Hood slides over the rear of the Cooling Unit and baffles the air intake and exhaust, 8-foot power line procides switched power for the inline fan to match the on/off cycle of the wine cooling unit.
  
  
• White Louvered Grill
  If you are using your Cooling Unit as a through-the-wall system, this Louvered Grill can be installed outside the Cellar to cover the rear of the Unit. The Grill can be painted to blend with surrounding d1/2©cor. Measures 20" by 12".
  
  
• Louvered Wood Grill
  Fits over the Front of all CellarPro 1800 Cooling Units, and can be configured to match the wine racks in your wine cellar. The Louvered Wood Grill is available in a choice of woods and finishes to with with other wine rack components in your wine cellar. (Please allow 4-6 weeks lead time.)
  
  
• Air Filter and Frame
  Imagine--no more coils to clean! When the Filter becomes dirty, simply pull out the Frame, replace the dirty filter with a clean one, and return the Frame to the Cooling Unit. The Fiber Orientation and Graduated Density of this Filter are designed to capture more dust and particles than other synthetic filters.
  
  

If you are replacing a cooling unit in a wine cabinet other than a Le Cache, you may also need the following optional accessories:

• Mounting Clips (Pair)

• Powder-Coated Dark Grey Finish
• Super Quiet Operation
• Extra Cooling Power
• Electronic Thermostat
• Digital LED Display
• Adjustable Humidity Control
• Energy-Saver Mode
• Quick-Chill Mode
• Audible and Visual Alarms
• High-Output Compressor
• Electrofin Coated Coils
• Min/Max Temperature
• Maintenance-Needed Indicator
• Auto-Defrost Cycle
• Ultra-Quiet Operation (< 50 dBA)
• Power On/Off Switch
• Removable Steel Case
• Power Cord Exits from the Rear
• Vibration-free Operation
• Please Note: This wine cooling unit can be used in 187-254V environments at 50Hz, and 198-254V environments at 60Hz. The power plug provided is Nema 6-15P 15A 250V Plug (Male). It has a screw cover plug housing with internal lug connections, and can be swapped easily to conform to local plug configurations.
• Warranty: 5-Year Limited Warranty - Parts and Labor