Complete 5 Liter Pressurized Cleaning Bottle & Tube Kit
 | BeverageFactory.com is proud to offer a complete solution to cleaning kegs. These kits are both economical and easy to use. Just tap one of these bottles filled with cleaning solution like it was a normal keg to clean out your lines. Clean lines mean fresh tasting beer. |
BeverageFactory.com is proud to offer a complete solution to cleaning kegs. These kits are both economical and easy to use. Just tap one of these bottles filled with cleaning solution like it was a normal keg to clean out your lines. Clean lines mean fresh tasting beer.
The kit includes a pressurized cleaning bottle and tube, a bottle cap, a 4-oz. bottle of beer line cleaner, a nylon cleaning brush and a standard duty faucet wrench (not shown).
- Fill the cleaning bottle with line cleaner solution. Secure the bottle cap onto the mouth. Detach the keg coupler from your keg and attach it to the cleaning bottle cap.
- Place a bucket or drain underneath your faucet to catch the cleaning fluid. Your draft beer system is now ready to be cleaned.
- Pull forward on your faucet handle to begin. Your CO2 cannister forces the cleaning solution through the keg coupler, through the beer lines, out of your faucet and into the waiting waste receptacle.
- Repeat the above with clean water to rinse the lines, and you now have a clean, fresh-tasting draft beer system again.
We recommend that you clean your draft beer system with Beer Line Cleaner at least every month or every other keg. Every four or five normal cleanings, we suggest you use an Acid Line Cleaner to remove mineral deposits and prolong the life and quality of your draft beer system.
Complete 5 Liter Pressurized Cleaning Bottle & Tube Kit Reviews
| Average Customer Rating: | (5) |
| (based on 2 reviews) |
| Beer Lovers Dream | |
| by: | JP (08-14-2009) Dallas, TX |
| Comments: | Just arrived it took less than 10 minutes to clean my lines. Just followed the instruction. Will use it to clean my beer lines after keg. |
| Bottom Line: | I would recommend this product. |
| Thanks Beverage Factory! | |
| by: | Eddie (07-29-2008) Tom's River, NJ |
| Comments: | Thanks to the Beverage Factory for helping me discover this product. I have the Danby kegerator and I used to try and replace my beer lines when they got gunky because the hand pump kits don't match up with it. I spoke with one of the guys at the Factory and they said this kit still worked with the Danby because all you have to do is attach the coupler to it. This was a revelation because getting in that tower to try and remove or attach the beer line is a total pain! I didn't put the dip tube on the first time I tried to use it and when I called for technical support, they were able to resolve my issue quickly and give advice on the best way to attach the dip tube. Now I can keep my lines clean and my beer tasting great. |
| Bottom Line: | I would recommend this product. |
Available Options:
Recommended Products:
 |  |  |  |
