Wholesale Pricing Available. Apply Now
Cinco de Mayo Flash Sale - Up to 45% off!

Perlick PERL Keg Beer Creamer Faucet - Stainless Steel

Model: 680SS
51 Reviews
$70.00

90 Day Money Back Guarantee
Select Model:
IN STOCK (usually ships within 24 hours)
  • This Perlick 680SS Forward Sealing Faucet features a fingertip push back control that adds just the right amount of head
  • Patented forward sealing design eliminates the need for a valve shaft exposed to beer and air
  • This NSF-approved faucet has a stainless steel construction that will not pit or tarnish
  • Spout angle is more vertical, allowing a more thorough draining after each pour and no horizontal area for beer to collect
  • Polished interior ensures a smooth flow with less agitation and less foaming
DESCRIPTION
FEATURES
REVIEWS
Q&A

This Perlick 680SS Push-Back Creamer Faucet enables the operator to pour the precise amount of foam every time. Pushing the handle back moves a stainless steel piston, which exposes small holes. The turbulence created by beer passing through the holes produces a creamy head.

Thanks to its stainless steel construction, this NSF-approved faucet will not pit or tarnish. It features a revolutionary ball and floating front seal design that prevents beer from being exposed to air, so the handle lever won't stick and there will be no build up of mold and bacteria in the faucet body. The spout angle is more vertical on this faucet to allow for a more thorough draining after each pour, so there is no horizontal area for beer to collect. It also has fewer internal parts, resulting in better reliability and fewer service calls.

  • All Perl faucets include a stainless steel lever for strength and sanitation.
  • Forward seat design to prevent lever from sticking
  • More sanitary than rear seating faucets
  • 1"W x 4"H x 2 3/4"D
Faucet Replacement Parts
Item630680650690Description
167829-167829-167829-167829-1Handle Jacket, Chrome
67829-1TF67829-1TFN/AN/AHandle Jacket, Tarnish Free
267820-167820-167820-167820-1Compression Bonnet, Chrome
67820-1TF67820-1TFN/AN/ACompression Bonnet, Tarnish Free
367828-167828-167828-167828-1O-Ring, Compression
467819-267819-267819-267819-2Bearing Cup
5A68726-1N/A68626-1N/AHandle Lever
5BN/A68810N/A68810Handle Lever, Push Back Creamer
667830-167830-167830-167830-1O-Ring, Pivot Ball
767933-167933-167933-167933-1O-Ring, Front Seat
8308-3-2P308-3-2P308-3-2P308-3-2PCoupling Gasket
9N/AN/A68206-168206-1Flow Control: Compensator
10N/AN/A67989SK67989SKFlow Control: Seal Kit
11N/AN/A67989LK67989LKFlow Control: Lever & Seal Kit

Follow these instructions if you need to take the faucet apart to replace worn parts.

Note: Anytime the Front Seat (I), O-ring (H) or Coupling Gasket(s) are removed, they should be replaced. Always use OEM replacement parts.

TO DISASSEMBLE:

  1. If faucet is USED, soak faucet in warm cleaning solution for 1-2 minutes to free up bonnet and handle jacket. If the faucet is NEW, submerge the faucet in warm water for 5 seconds.
  2. Unscrew and remove Jacket (1).
  3. Unscrew and remove Compression Bonnet (2).
  4. Remove Coupling Gasket (8) only if cut or worn.
  5. To remove the Handle Lever Assembly (5A or 5B), lift it upward and push back.
  6. To remove Front Seat (7) use a small screwdriver from the bonnet end of the faucet.
  7. To remove O-ring (6) use a small screwdriver from the bonnet end of the faucet.
  8. Inspect O-rings for wear or damage and replace as necessary.
  9. To remove flow control lever, unscrew cap and pull out.
  10. Remove flow control compensator from rear of faucet.

TO ASSEMBLE:

  1. Re-install O-ring (6) into O-ring groove from bonnet end (use a small blunt screwdriver).
  2. Re-install front Seat (7) into O-ring groove (use a small blunt screwdriver). Note: Seat must move freely in seat groove.
  3. Re-install Handle Lever Assembly (5A or 5B).
  4. Re-install Bearing Cup (4).
  5. Re-install Bonnet Washer (3) into Compression Bonnet (2).
  6. Re-install Compression Bonnet (2). Tighten by hand only. Do not use any tool, as this can damage the faucet.
  7. Re-install Handle Jacket (1).
  8. Re-install Coupling Gasket (8) if removed.
  9. Install flow control compensator into rear of faucet and orientate so level engagement hole is facing lever insertion hole.
  10. Install flow control lever, ensure pin on end of lever is aligned with compensator engagement hole and tighten cap.
UPC: 700697202052

10/25/2019

solved my beer pouring problems
David

My original equipment faucet leaked, this one doesen't.

07/05/2019

Great Product
Bobby

This beer faucet works as advertised and does not stick. It has fewer parts than my previous faucet and is very easy to clean. I would recommend this faucet as a replacement if your current faucet is sticking.

01/29/2019

Best beer faucet?
Joh

I really appreciate this style of faucet. The pour and action are smooth as silk. I haven't torn it down to clean yet, but from what I can tell the assembly is simple enough that it should be pretty easy to clean

09/09/2018

Best for home kegerator
Mike

I had the Kegco faucets on a dual tap kegerator and they kept getting stuck when the sugar in the beer gets in the faucet. Finally I broke one of the faucet handles and had to get the perlich version. Works perfectly and no sticking.

02/01/2018

It just works
ecanivan

I bought this to replace the standard KegCo faucet that came with my tower. The standard faucet would stick nearly every use. This one has performed flawlessly and doesn't require much effort to move.

Showing Reviews 6-10 of 51
  1 2 3 4   Last

Be the first to ask a question.

CONNECT WITH US!

@BeverageFactory
Added to Cart

.....