Everest's EBD series of Back Bar and Direct Draw Keg Refrigerators feature durable and attractive textured and laminated black vinyl exteriors with heavy-duty stainless steel countertops, galvanized steel interior walls, high quality stainless steel floors, and 1-3/4" thick high density foamed-in-place polyurethane insulation. The EBD2-24 has two solid doors with textured and laminated black exteriors and galvanized steel interiors. Heavy-duty recessed door handles allow for a flat surface, while door locks ensure that your beverages are protected from unwanted access.
The EBD2-24 has two NSF approved 3" diameter insulated stainless steel draft arms with air distributors, and can hold and dispense two 1/2 barrel keg at the same time. An easy-to-set analog thermostat dial can be set between 32°F to 42°F to keep your draft beer at it's perfect serving temperature.
EBD series back bar and keg beer dispensers use a forced-air cooling system with dual evaporator fan motors to provide balanced airflow throughout the unit, and oversized condenser and evaporator coils help to quickly achieve and maintain the desired temperature. A removable side panel and slide-out condensing unit allow for convenient repair and maintenance. These refrigerators use environmentally friendly R-134A refrigerant.
Please Note: This Commercial Grade Kegerator does not include the Direct Draw Kit. If your keg supplier does not provide the dispense kit, it will need to be purchased separately.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Two full-size kegs
One full-size keg (plus two 5-gallon kegs or one quarter slim keg)
Three quarter slim kegs
Six 5-gallon kegs
Analog dial thermostat (32°F to 42°F)
Heavy duty stainless steel countertop, with textured and laminated black vinyl exterior
Galvanized steel interior wall and stainless steel floor
High quality 16 gauge stainless steel worktop
1-3/4" thick high density foamed-in-place polyurethane insulation
Slide-out condensing unit for convenient repair and maintenance
Forced-air cooling with dual evaporator fan motors providing balanced airflow throughout cabinet to ensure faster temperature drop
Energy efficient condensate drain pan assembly heated by high side copper tube
Heavy duty recessed door handles with door locks
Shielded incandescent interior lighting with on/off switch
NSF approved 3" diameter insulated stainless steel draft arms with air distributor
Built-in caster thread receptacles for all units
Compressor (Parts Only)
Keg Storage Capacities
Full Size / 1/2-Barrel
Color / Material
Number of Doors
Accepts Custom Overlay Panel
115 V, 60 Hz
You may need to download Adobe Acrobat Reader to view and print PDF's. Click the link below to download Adobe Acrobat Reader for free. Download Adobe Reader