Taprite Commercial Dual Gauge Primary Keg Beer Regulator

Model: T742
20 Reviews
$127.00SAVE 25% - $31.75

90 Day Money Back Guarantee
IN STOCK (usually ships within 24 hours)
  • Low pressure gauge (the top gauge) indicates output pressure to keg
  • High pressure gauge (the side gauge) indicates CO2 tank pressure remaining
  • Ball-type check valve helps prevent product back-up into the regulator, a common source of malfunction
  • Gray polycarbonate bonnet provides easy pressure adjustment and will not chip, break, or fade
  • All regulators are pressure tested to assure in-field reliability
This dual gauge regulator is loaded with features! The regulator has a large hand control which makes it easy to adjust the pressure inside the keg. This is a double gauge regulator with the main gauge indicating how much Co2 pressure is inside the keg.

  • Gray polycarbonate bonnet will not chip, break or fade.
  • Non-adjustable "shut-down" built in to the body of regulator
  • The high pressure ports have left-hand female threads to prevent their use as a lo-pressure outlet
  • The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50 PSIG.
  • Internal relief valve opens whenever delivery pressure exceeds set pressure by 15 PSIG. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced.
  • Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts.
  • Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed.
  • Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The ball-type check valve helps prevent product back-up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16" I.D. pressure tubing.
  • All regulators are pressure tested to assure in-field reliability.
  • Seat assembly is easily replaceable in-field... no need to remove regulator from tank.
Warning WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.


Good price and easy to use.
Ben the Brewer

This is a good regulator as far as I can tell. My worry was it was much cheaper than the last one I bought and I was anticipating flaws or failures, none to report after 6 months of continuous use. I found the adjustment nob to be much more user friendly and quicker than the old bolt and nut version. I bought a second one recently.


great product very accurate

Nice easy to read gauges. Works great


Great product

This works great with my CO2 tank, and I have yet to have any issues. It is a solid regulator that is easy to adjust the CO2 pressure.


easy to use and read

The regulator is easy to read and the handle makes dialing in the pressure easy.


Super Rugged and Works Perfectly

It installed easily, was easy to set up, the directions for preset were right on. This is the one you want for a kegerator.

Showing Reviews 11-15 of 20
First   1 2 3 4  

Be the first to ask a question.


Added to Cart