Taprite Commercial Dual Gauge Primary Keg Beer Regulator

Model: T742
20 Reviews
$127.00SAVE 25% - $31.75

90 Day Money Back Guarantee
IN STOCK (usually ships within 24 hours)
  • Low pressure gauge (the top gauge) indicates output pressure to keg
  • High pressure gauge (the side gauge) indicates CO2 tank pressure remaining
  • Ball-type check valve helps prevent product back-up into the regulator, a common source of malfunction
  • Gray polycarbonate bonnet provides easy pressure adjustment and will not chip, break, or fade
  • All regulators are pressure tested to assure in-field reliability
This dual gauge regulator is loaded with features! The regulator has a large hand control which makes it easy to adjust the pressure inside the keg. This is a double gauge regulator with the main gauge indicating how much Co2 pressure is inside the keg.

  • Gray polycarbonate bonnet will not chip, break or fade.
  • Non-adjustable "shut-down" built in to the body of regulator
  • The high pressure ports have left-hand female threads to prevent their use as a lo-pressure outlet
  • The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50 PSIG.
  • Internal relief valve opens whenever delivery pressure exceeds set pressure by 15 PSIG. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced.
  • Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts.
  • Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed.
  • Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The ball-type check valve helps prevent product back-up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16" I.D. pressure tubing.
  • All regulators are pressure tested to assure in-field reliability.
  • Seat assembly is easily replaceable in-field... no need to remove regulator from tank.
Warning WARNING: This product has Brass components. Brass alloys are known to contain trace amounts of Lead, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.


Great customer service

I was shopping for a regulator online and found one that cost about twice what this Taprite T742 cost. I was unsure, so I called. The sales rep assured me the lower cost one would be great for my kegerator.....and it is! Saved me $$$$ !!



Iv'e had a lot of regulators, but this was the first with a way to tell how much C02 you have left in the tank. Easier control knob than most.


Works better than most regulators

I like the fact that you don't need a tool to change the pressure.


The Real Deal
Uncle Jeff

I use CO2 to transfer cleaner, sanitizer and beer. This is a solid, heavy duty unit with a great adjustment knob that you turn with your fingers. Using a screwdriver for a kegerator is ok as you do not need to adjust very often. For transfering this is the way to go.


Great durable and easy to use

I had a three gauge, two product system before I purchased this for my beer gas setup. Great performance and ease of use with the large adjustment knob. Prob will not buy any other brand of regulator.

Showing Reviews 16-20 of 20
First   2 3 4

Be the first to ask a question.


Added to Cart