Kegco Scratch & Dent - Copper Immersion Chiller 1/2" OD x 50' Coil

Scratch & Dent - We currently have a Kegco FL-CEC.5-50 Copper Immersion Chiller 1/2" OD x 50' Coil that has been returned to us.

PLEASE NOTE: Unless otherwise specified, the images shown are not the particular unit being sold.

Speed up your chilling process with Kegco's Copper Immersion Chiller, made from 50' of 1/2" copper tubing. Copper is a great material for an immersion chiller as it is a better conductor of heat than stainless steel. Wound into a tight stack of 12" diameter coils, this chiller can cool your wort in as fast as 20 minutes. This chiller is great for brewers who frequently brew large batches of beer. It features two standard garden hose fittings for easy connections on the inlet and outlet.

This chiller coil is approximately 9.75" in diameter, and is perfectly sized for cooling 14 to 30 gallons of wort. The 1/2" O.D. is superior to a 3/8" O.D. chiller, since it contains more cool liquid to cool off the wort faster.

• Tube Dimensions: 50' x 1/2" (outer) diameter
• Coil Dimensions: 9.75" diameter x 24-1/2" high
• Input Fitting: Female GHT
• Output Fitting: Male GHT

Labor - 3 Months

For 90 days from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of theunit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in the user manual. In cases where a product cannot be repaired, Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.

Parts - 60 Months

For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers' shop and back to the user's home, as may be required, are the user's responsibility.

Additional Details

• Content losses of food or other, due to spoilage.
• Incidental or consequential damages.
• Parts and labor costs for the following will not be considered as warranty:
  • Door springs, and/or frames.
  • Inner door panels, door rails and/or door supports.
  • Light bulbs and/or plastic housing.
  • Plastic cabinet liners.
  • Punctured evaporator that voids the warranty on the complete sealed system.
  • Repairs performed by unauthorized servicers.
  • Shipping and handling costs associated with the replacement of the unit.
  • Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
  • Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
  • Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
  • Replacement of house fuses or resetting circuit breakers.
• Failure of the product if it is used for other than its intended purpose.
• This warranty does not apply outside the Continental USA.