Kegco Kombucha Kegs - Ball Lock 3 Gallon Strap Handle - Brand NewModel: KOM-3SH
- Ball lock Pepsi soda keg holds up to 3 gallons of Kombucha
- 304 grade stainless steel body provides the perfect sanitary environment for storage and dispensing of Kombucha
- Durable stainless steel strap handle on lid offers easy handling
- Stainless steel lid fastens tightly to body and features a pull ring pressure release valve
- NSF (National Sanitation Foundation) approved and meets NSDA voluntary standards
These 3 Gallon Ball Lock Kombucha Kegs (aka Pepsi Kegs or Cornelius Kegs) are suitable for small refrigerators or on the road. The ball-lock fittings are easy to access, making cleaning very simple. The 304 Grade Stainless Steel body provides the perfect environment to store and dispense kombucha due to it's smooth inert surface that does not harbor foreign bacteria, can withstand the acidity of the brew and is easy to clean. These soda kegs meet NSDA voluntary standards and are NSF (National Sanitation Foundation) approved. The lid fastens tightly to the body and has a pull-ring style pressure release valve to easily depressurize the keg. Working pressure must not exceed 130 P.S.I.G.
Tanks is carried out by assembling : upper part (handle top), lower part (rubber bottom) and shell (calendared ferrule). The assembling of the different metallic parts is made by round and longitudinal welding. All welding on the tank are automatically made, following TIG system in a inert atmosphere without any deposit of material. On top of the tank, there is an oval opening (mouth) which allow the closing of the tank by the lid. On the bottom there is a sump to enhance the draining off. Printed on the stainless steel of the external surface of the body, there are information about the capacity of the tank, its identification numbers and the manufacturer. The lid is made of stainless steel, is finished with handle, and has a pull ring relief valve.
The tank model "NC" is made of AISI type 304 stainless steel (1.4301) with No. 2B mill finish steel sheet which fulfils ASTM A240 specification. All inside surfaces are smooth to prevent any possible dirt or contamination from remaining inside after washing and sterilizing. Stainless steel does not react to magnetic attraction and it's color does not change due to cleaning or sterilizing. The top and the bottom are deep-drowned beginning from a stainless steel disk with a thickness of 1mm before the pressing. The body has a thickness of 0,70 mm.
To allow quick disconnect with the kombucha system, on its upper part the tank is equipped with one liquid plug and one gas plug. The gas plug has an incision on the hexagon and the liquid plug does not have an incision on the hexagon. They are both clearly marked by a stencil.
On the top part of the tank there are two welded stems, trough which the gas tube and the liquid tube are putted inside the tank, and top which the plugs are fixed.
The bottom of the tank is covered with black hot vulcanised natural rubber bonded onto the steel. One stainless steel handle on the top offers easy handling. Four openings in the bottom skirt enhance the drain of water when the keg is upside down. The maximum outside diameter of the rubber part is larger than the one of the body. In this way any damage by impact is minimized and the keg can be rolled.
- Kombucha Keg
- Ball Lock fittings
- 304 Grade Stainless Steel
- Single strap handle
- Approved by (NSF) National Sanitation Foundation
- Meets NSDA voluntary standards
- Made in Italy
- Capacity: 5 US Gal
- Weight: 2,70 kg 1/2 0.20 2
- Capacity till gas dip tube: 11,4 l 1/2 0.20
- 8.5"W x 16.5"H / 219 1/2 2 mm W x 422 1/2 2 mm H
- Plugs center line:172 1/2 1 mm
Be the first to ask a question.
08/13/20143 gallon keg
This keg is a perfect size to fit in my mini-fridge. It will be easy to clean and will give me years of service.