CellarPro Houdini Wine Cellar Cooling Unit (300 Cu.Ft. Capacity)

The CellarPro 1800H Houdini Cooling Unit is the first cooling unit designed specifically for glass-enclosed, shallow-depth wine cellars and wine cabinets. The 1800H provide the same BTUH output as the 1800XTS allowing it to be used to cool wine cellars with similar thermal loads. This air-cooled refrigeration equipment has dual independent variable-speed fans that offer flexibility trade-off between super-quiet operation or maximum performance. Also, it requires fresh air intake from the space outside to dissipate the heat generated and note that the fresh air intake CANNOT come from the wine cellar space. With its 10-1/2" deep and 10" tall design, this cooling unit can disappear inside or atop of the cellar.

Designed and built by the same people who bring you Le Cache, the ultra-quiet, vibration-free CellarPro cooling unit includes upgraded components and new features, resulting in an advanced cooling system that outperforms the competition in every category. Each CellarPro Cooling Unit comes with an Electronic Thermostat and digital LED Display, allowing you to precisely set the desired temperature inside your cabinet. The Cooling System also offers adjustable humidity control to easily maintain the optimal humidity, up to 70% RH, and Automatic Defrost to prevent ice build-up. In addition, the Digital Controls offer convenient Energy-Saver and Quick-Chill Modes.

Variable-speed fans with independent control provide maximum flexibility and versatility:

• Variable fan speed for the cold side:
• Provides cooling flexibility
• Low fan speed: 1456 BTUH @ 55°F / 51°F lowest achievable cellar temperature
• High fan speed: 1864 BTUH @ 55°F / 47°F lowest achievable cellar temperature
• Variable fan speed for the hot side:
• Choose between performance vs noise
• Low fan speed: 49 dBA / 85°F maximum intake temperature
• High fan speed: 55 dBA / 95°F maximum intake temperature

Please Note:For installations in environments down to 20°F, we recommend adding our compressor heater modification to the cooling unit. Below 20°F, the cooling unit's performance will begin to degrade.

OPTIONS AND MODIFICATIONS

Cold Air and/or Hot Air Duct Kit
Allows CellarPro 1800H Cooling Unit to be ducted up to 50 equivalent feet. The Kit includes: 50ft. (25ft. per duct) per side (hot, cold, or both) of 6-inch insulated ducting (R-6). Galvanized Metal Duct Hood are place on the Cooling Unit and restrain the air intake and exhaust.

Cold Side

• Up to 50 equivalent feet (25' per duct) with 6-inch insulated ducting
• Intake from the left / exhaust from the front

Hot Side

• Up to 50 equivalent feet (25' per duct) and 85°F maximum intake temperature (no auxiliary fan required
• Up to 100 equivalent feet (50' per duct) and 95°F maximum intake temperature (requires auxiliary fan)
• Intake from the top or the right and exhaust from the top or the rear

• Powder-Coated Dark Grey Finish
• Designed for shallow-depth glass wine cellars
• Capacity: 300 cubic feet in properly insulated and sealed wine cellars.
• Dual high-output fans come with independent variable speed settings for your choice of maximum cooling power at the high fan speed, or super-quiet operation (49 decibels) at the low fan speed.
• Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
• Custom coils generate maximum cooling power inside the cellar.
• Excess condensate is managed with a high-capacity stainless steel condensate pan and 1000W electric heating element.
• Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
• Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use.
• Remote thermostat is available as an upgrade.
• Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
• Unit operates with minimal vibrations and less noise than comparable units from competitors.
• Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
• With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the rear or right side of the cooling unit, providing flexibility for most installations.
• Common dedicated 15-amp circuit is required to power the unit.
• Mounting brackets, included as standard equipment, ensure easy installation.
• Removable steel case provides access to the internal components for servicing and repair.
• Warranty: 2 Years (Entire System) / 5 Years (Compressor)

Assuming the 1800H Houdini Cooling Unit is placed in a 75°F ambient temperature, R13 insulation in the non-glass walls and no ducting, it would work in the following cellars:

Please Note:For installations in environments down to 20°F, we recommend adding our compressor heater modification to the cooling unit. Below 20°F, the cooling unit's performance will begin to degrade.