Taprite T742 - Commercial Dual Gauge Primary Keg Beer Regulator

Regular Price: $67.44
You Save 20%
$53.95
This dual gauge regulator is loaded with features! The regulator has a large hand control which makes it easy to adjust the pressure inside the keg. This is a double gauge regulator with the main gauge indicating how much Co2 pressure is inside the keg.

  • Gray polycarbonate bonnet will not chip, break or fade.
  • Non-adjustable "shut-down" built in to the body of regulator
  • The high pressure ports have left-hand female threads to prevent their use as a lo-pressure outlet
  • The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50 PSIG.
  • Internal relief valve opens whenever delivery pressure exceeds set pressure by 15 PSIG. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced.
  • Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts.
  • Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed.
  • Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The ball-type check valve helps prevent product back-up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16" I.D. pressure tubing.
  • All regulators are pressure tested to assure in-field reliability.
  • Seat assembly is easily replaceable in-field... no need to remove regulator from tank.

Taprite T742 - Commercial Dual Gauge Primary Keg Beer Regulator Reviews

Average Customer Rating:
(5)
(based on 16 reviews) 
Great gauge!
by:Wags brewery (03-12-2015)
Dallas
Comments:This gauge is very easy. The knob is easy to turn. Many have to use a screwdriver! Aaauugghh!!
Recommend
Bottom Line:I would recommend this product.
 
Good Primary Regulator
by:PaulKegger (11-10-2014)
Healdsburg, CA
Comments:I have a three tap keggerator and this works good with a short tube connecting the 3 guage. Only challenge is with the knob when pushing it back in lock possition it makes really fine adjustments challenging, but not impossible.
All in all, it's what I needed and it works well!!
Bottom Line:I would recommend this product.
 
Finally a good regulator.
by:TED (10-26-2014)
TX.
Comments:After two cheap regulators this one works like it should.
Bottom Line:I would recommend this product.
 
Works great so far
by:Matt (08-06-2014)
Metro Detroit
Comments:I am running a quarter and a half on a 20lb tank. I like the fact I can monitor tank pressure as well as use the dial to change line pressure. The dial is much easier than a screw type to make adjustments.

Shipping was much quicker than I expected so that was also a plus for me.
Bottom Line:I would recommend this product.
 
Taprite T742 - Commercial Dual Gauge Reg
by:Jerry (05-30-2014)
San Diego, CA
Comments:Had a foam problem, and Cary pointed me to this new regulator. Problem solved! Great price too!
Bottom Line:I would recommend this product.
 
Shipping Calculator
Enter Your Shipping Zip Code:
Shipping Options
Please enter a zip code.
All charges are based on a quantity of 1.
Click "Add to Cart" above to change quantities
and make actual ship method selection.