Kegco 24" Wide Homebrew Dual Tap Black Commercial Built-In Right Hinge Kegerator

Model: HBHK38BSU-2

29 Reviews

$2,728.00SAVE 45% - $1227.60

$1,500.40

+ FREE SHIPPING

Cabinet Color

Black

$1,500.40

Stainless Steel

$1,601.92

Taps

1 Tap

$1,455.85

2 Tap

$1,500.40

3 Tap

$1,542.75

Hinge

Right

$1,500.40

Left

$1,500.40

IN STOCK (usually ships within 24 hours)

DESCRIPTION

FEATURES

SPECS

INFO & GUIDES

REVIEWS

Q&A

Specially designed to meet the unique requirements of dispensing home brew beer from two ball lock kegs
Dual tap dispense system consists of stainless steel and food grade plastic to ensure cleanliness
Front-venting design allows homebrew kegerator to be built into cabinetry with a seamless look that is easy to maintain and provides more floor space
Enough floor space to house a full size keg, two quarter slim kegs, or up to three 5 gallon kegs for a variety of configurations
Kit includes Kegco Exclusive 14" tall draft tower, two stainless steel faucets, keg couplers, CO2 regulator, and CO2 tank

Dimensions: 34-1/8" H x 24" W x 25" D

With a versatile design, easy-to-use controls, and a quality dispense system, this stylish Kegco HBHK38BSU-2 Dual Faucet Digital Undercounter Homebrew Kegerator is the best two-tap built-in beer dispenser available for your home bar, kitchen, or game room. At 3200 BTUs, it boasts the most powerful compressor in its class, delivering unbeatable cooling for fast recovery and temperature pulldown. The wide available temperature range allows it to be set between 32 and 59 degrees Fahrenheit, giving you the option of serving cold beer, coffee, kombucha, or even wine straight from a keg.

A premium kegerator should have premium components, and the two tap draft dispense system included with the HBHK38BSU-2 features the very best parts at the very best value.

X-CLUSIVE Dispense System includes tower, drip tray, cleaning kit, regulator, keg coupler, and CO2 tank

The Kegco Exclusive 14" tall double faucet stainless steel draft tower with two stainless steel faucets ensures your beer only touches 100% stainless steel metal components for the ultimate in sanitation. A two product Premium dual gauge regulator is also included, so you'll always know when it's time for the corrosion-resistant, electric red epoxy-coated CO₂ tank to be refilled. The included ball lock keg couplers will allow you to tap ball lock home brew kegs. The premium draft parts included in Kegco's exclusive direct draw kit give you the peace of mind of knowing that your beer is being served at its optimum quality.

The front-venting design allows you to build this kegerator into cabinetry for a seamless look that is easy to maintain and provides more floor space. A stainless steel guard rail is included to prevent glasses or mugs from sliding off the top in freestanding applications.

Easily adjust and view the set temperature, toggle between Celsius and Fahrenheit, or turn the interior light on and off with the push of a button. The controls can be accessed effortlessly at the front of the cabinet, out of the way of the dispense system.

The beautiful stainless steel interior is more durable than the plastic liner found in many competing models and easy to clean. Enough floor space is provided to house a full size keg, two quarter slim kegs or up to three 5 gallon kegs for a variety of configurations. PLEASE NOTE: Will not hold 50L European kegs.

Two adjustable wire shelves are included, allowing you to convert these beer dispensers into refrigerators when you are in need to extra cold storage. Shelf adjustment is easily done in 1/2" increments so you can space them according to your needs.

14 inch stainless steel tower comes longer than most standard towers giving you more than enough space to fill up your pint glass or growler. Comes equipped with two metal faucets and is compatible with all standard keg couplers.

Forced air refrigeration ensures that cold air is evenly distributed throughout the cabinet so there are no hot spots. Cold air is directed into the beer tower, ensuring that the lines are cool all the way up to the faucet so there's less foam between pours.

Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Premium Double Gauge CO₂ Regulator with Air Splitter
This two product regulator works with any CO₂ tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO₂ pressure is inside of the kegs. The side gauge measures the remaining volume of CO₂ in the tank, so you'll know when it's about time to get the tank filled. This regulator has an air splitter with two shut-off valves to deliver CO₂ to one or two kegs at the same pressure, and features a large hand control that makes it easy to adjust the pressure inside of the keg.
Includes Two 5 Foot Lengths of 5/16 Inch I.D. Blue Air Line Assembly with 4 Plastic Snap Clamps
This standard length 5 foot 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assemblies come with two plastic snap clamps with a reusable clamp design.
Includes two sets of Ball Lock Home Brew Keg Couplers
Each set includes both a gas in and a beer out coupler that work with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
Includes a Kegco Exclusive 14" Tall, 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16 inch I.D. clear beer tubing. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
All dispensing accessories are UL recognized components
Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments
Large enough to hold most full size kegs, including Coors and Miller. Interior height is a limitation, so kegs that are taller than the standard half barrel (23.25") may not fit with the keg coupler installed. We have run into this issue with certain German kegs along with the M system coupler, but most major brands in D and S System kegs will not be an issue.
Holds (1) full-size keg, (2) quarter slim kegs, (3) 5 gallon commercial kegs, or (3) 5 gallon home brew kegs
PLEASE NOTE: Will not hold 50L European kegs
Sleek black cabinet with stylish stainless steel door
Digital temperature control keeps temperature between 32-59 degrees Fahrenheit
Maximum Ambient Temperature: 100 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
A perfect option for dispensing beer, soda, kombucha, wine or cold brew coffee
Stainless steel guard rail helps prevent mugs and glasses from sliding off
Stainless steel interior is more durable than the plastic liner found in most kegerators
Plugs into standard home outlet
UL, NSF-7 & ETL Sanitation listed

UPC: 810069433790

Dimensions
Height	34-1/8"
Width	24"
Depth	25" (without Handle)

Weight
Unit Weight	115 lbs.

Warranty
Labor	1 Year
Parts	1 Year
Compressor (Parts Only)	5 Years

Key Features
Built-in Capable	Yes
Keg Coupler	Optional Add-On
Security Lock	Yes
Regulator	Optional Add-On
CO2 Tank	Optional Add-On
Cleaning Kit	Optional Add-On
Outdoor Use	No
Commercial Use	Yes

Keg Storage Capacities
Full Size / 1/2-Barrel	1
1/4-Barrel Slim	2
1/6-Barrel	3
5 gal. Ball/Pin Lock Keg	3

Exterior
Cabinet	Black
Drip Tray	Yes
Guard Rail	Yes
Casters	No

Draft Beer Tower
Number of Faucets	2
Material	Chrome
Height	12.25"
Diameter	3"

Door
Color / Material	Stainless Steel
Number of Doors	1
Door Handle	Towel Bar AND Curved
Field Reversible	No
Accepts Custom Overlay Panel	No

Cooling System
Type	Compressor
Defrost System	Automatic
Front Ventilation	Yes

Controls
Adjustable Thermostat	Yes
Digital	Yes

Electrical
Electrical Requirements	110v/60hz
Running Amps	1.0 A

User Manual Digital Controller Manual Parts Diagram Dispense Kit Assembly Manual Pressurized Cleaning Kit Manual Energy Guide Material Safety Data Sheet Correct Installation

05/03/2019

Great Under Counter Unit

Bart

I am really pleased with the unit. I installed in my new bar so the tower was mounted on the bar top. No problem with the length of the beer lines and the tower is nice and cold with the internal fan. All parts are high quality and the unit was very easy to assemble. If you are going for an under the counter install I used a rubber flexible PVC coupling to insulate the space between the unit and the tower.

04/30/2019

Great Deal

Foam Busters

In the beer industry business and have always dealt with True or Beverage Air when it comes to direct draw units. This unit was much less expensive than either and works just as well. Highly recommend thinking about Kegco.

06/29/2018

This is the one

Matt

I had some years of service in the keg delivery business under my belt so I knew what I was looking for. This unit checks off all the boxes. We have it in an outdoor kitchen application in southwest Florida and even on a 90 plug degree day, I open that cooler door and I'm greeted with a frosty 34 degree blast of air. It's really incredible. Don't try and skimp with a regular kegerator. Get the outdoor rated one. There's a reason they're more expensive. Trust me, this one will give you many good times with friends and family. We've had it for about a year now and things are still running smooth. Make sure to clean your lines regularly to ensure the best tasting beer in town.

05/24/2018

Great product for the cost

Paddy

Product packaging was top notch - always a concern when something is shipped by truck. Pretty easy set-up as this is my first kegerator.
A couple of nits: the instructions were silent on the black plastic tube within the kegerator (goes into the tower to keep the tower cool); the instructions were silent on the 90 degree elbows that were included (attach to the coupler when using 1/6 barrels); although I ordered a two faucet tower, I received only one neoprene washer to use on the couplers.
Very happy with the product so far.

05/18/2018

Great Service

Kevin

Great item, great service after the sale.

Showing Reviews 11-15 of 29

Question:

Can you fit two gas tanks (CO2 and Nitro), with regulators, in this fridge along with 3 sixth barrel kegs?

by Doug on October 21, 2018

Answer:

Unfortunately, 2 gas tanks and 3 sixth barrel kegs will not fit in this unit.

by Krystina on October 22, 2018

Staff Answer

Question:

Does the steel bar on top come off for under counter installation?

by Tim on January 07, 2019

Answer:

Hello Tim, Yes the steel bar is removable. Feel free to contact me directly in the morning if you'd like to place an order. I'll check availibility and make sure to find you a better price.
Ben Reaney
858-218-2339

by Ben on January 07, 2019

Staff Answer

Question:

I have a question about the door handle. The pictures show two totally different door handles. I would prefer the one that is more of a vertical towel bar handle. Can you confirm?

by Nicole on March 26, 2019

Answer:

You get both a curved and a towel bar handle.

by Dave on March 27, 2019

Staff Answer

Question:

Can the fridge be purchased separate. I don’t need the tank or regulator or tower. Just the fridge. Thanks

by James on March 12, 2019

Answer:

Yes. Please contact sales for assistance.

by Dave on March 26, 2019

Staff Answer